Herunterladen Inhalt Inhalt Diese Seite drucken

Power Management Function - AEG HK8542H1XB Benutzerinformation

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

To activate the function: activate the
hob with
. Do not set the heat setting.
Touch
for 4 seconds.
Deactivate the hob with
To deactivate the function: activate the
hob with
. Do not set the heat setting.
Touch
for 4 seconds.
Deactivate the hob with
To override the function for only one
cooking time: activate the hob with
comes on. Touch
Set the heat setting in 10 seconds. You
can operate the hob. When you
deactivate the hob with
operates again.
4.10 OffSound Control
(Deactivating and activating
the sounds)
Deactivate the hob. Touch
seconds. The display comes on and goes
out. Touch
for 3 seconds.
comes on. Touch
choose one of the following:
- the sounds are off
- the sounds are on
To confirm your selection wait until the
hob deactivates automatically.
When the function is set to
hear the sounds only when:
• you touch
• Minute Minder comes down
• Count Down Timer comes down
• you put something on the control
panel.
4.11 Power limitation
Originally the hob is at its highest
possible power level.
To decrease or increase the power
level:
1. Deactivate the hob.
2. Touch
for 3 seconds. The display
comes on and goes off.
comes on.
.
comes on.
.
.
for 4 seconds.
the function
for 3
or
of the timer to
you can
3. Touch
for 3 seconds.
comes on.
4. Touch
. P0 comes on.
5. Touch
/
of the Timer to set the
power level.
Power levels
Refer to "Technical information" chapter.
• P0 — 7200 W
• P1 — 1500 W
• P2 — 2000 W
• P3 — 2500 W
• P4 — 3000 W
• P5 — 3500 W
• P6 — 4000 W
• P7 — 4500 W
• P8 — 5000 W
• P9 — 6000 W
CAUTION!
Make sure that the selected
power fits to the house
installation fuses.
4.12 Power management
function
• Cooking zones are grouped
according to the location and number
of the phases in the hob. See the
illustration.
• Each phase has a maximum electricity
loading of 3700 W.
• The function divides the power
between cooking zones connected to
the same phase.
• The function activates when the total
electricity loading of the cooking
zones connected to a single phase
exceeds 3700 W.
• The function decreases the power to
the other cooking zones connected to
the same phase.
• The heat setting display of the
reduced zones changes between two
levels.
Power management function with
Power limitation function
When you set the Power limitation
function to 4.5 kW or less, power of the
hob is divided between all cooking
zones.
ENGLISH
11
or

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis