Yearly Procedures - CYBEX 13240 VR1 Bedienungsanleitung

CAUTION: Worn handles
Do not use handles if less then 1/8" of material remains on edge.
•
Replace all worn handles immediately.
•
Inspect bars and handles for wear, paying particular attention to tab area connection points.
Inspection
Inspect bars and handles for wear, paying
particular attention to tab area connection points.
Inspect snap links for proper latching (indicates
wear).
Inspect all labeling for readability, including
instructional placards, warning and caution
decals.
Inspect all weight stacks for proper alignment
and operation.
Inspect guide rods for lubrication.

Yearly Procedures

Replace all cables and belts annually
Cybex Owner's Manual
Replace bar if less
than 1/8" of material
remains to the edge.
Attachment
Hole
Replace all worn handles immediately.
Replace all loose or worn grips immediately.
Replace all worn labeling immediately.
Correct all improper alignment and operation
issues immediately.
Wipe Weight Stack Guide Rods clean over entire
length. Lubricate with a light coat of medium
weight automotive engine oil.
21
Action