Over View Main Menu - Polytron HDM 4 T Bedienungsanleitung

Over view Main menu:

The main menu occurs after pushing the button "Menu".
Menu navigation by using arrow buttons.
Setting confirmation by "Enter".
One step back through pushing button "Back"
1 Alarm Status
2 Encode setting
3 Modulate Setting
4 IP Output Setting
Alarm Status
1.
If there is no HDMI signal at the input, the menu point "Alarm Status" will be shown: "No video in"
and the alarm indicator (9) turns on. This lights also red if a bit rate overflow occurs at the out-
put.
2.Encode Settings
The 4 HDMI - Inputs are to select as follows:
2. 1 Input 1 :
2. 2 Input 2 :
Video Bit Rate:
Set value between 1000 and 19000 Mbps
Default: 6000 Mbps
Audio Bit Rate:
Selection: 64, 96, 128, 192, 256, 320 kbps.
Default: 256 kbps.
H.264 Profile:
Selection: Automatic, High Profile, Main Profile, Baseline Profile.
Default: High Profile
2.1.1 Program 1
2.2.1 Program 1
5 Network Setting
6 Saving Config
7 Loading Config
8 Version
2.1.2 Program 2
2.2.2 Program 2
23