Clatronic bqs 2850 Bedienungsanleitung Seite 34

5....-05-BQS 2850
GB
• Insert the plug in a duly installed 230V/50Hz protective contact socket.
• Fill in 1.5 l of cold water up to the "MAX" mark in the trough.
• Set the thermostat for the desired use: a low or medium temperature for war-
ming or cooking, MAX. for rapid cooking and grilling. The LED shuts off when
the desired temperature is reached.
• Lay the food directly on the grill grid. Never use plates, trays or aluminum foil
beneath the food. The grilling time depends on the thickness of the food and the
set temperature. Thick foods are grilled more quickly by piercing it with metal
skewers. Turn the food from time to time.
• The height of the grill grid can be varied. Please see illustration 3.
• Should the water level drop below the MIN mark after continuous use, pull the
plug from the socket and fill with water until the MAX mark is reached. Do not
pour any cold water over the hot heating element. Otherwise this may be dama-
ged.
Switching-off: Turn the thermostat to „0" and pull the plug.
The heating element is fitted with a safety switch. This prevents the heating element
being operated outside the grill tray. If the heating does not switch on, please check
the mains connection and whether the heating element is fitted correctly into the
grill tray.
• Always pull the plug from the mains socket before cleaning and wait until the
unit has cooled down.
• Clean the unit with a slightly dampened cloth. Never dip the heating element
into water!
• The gridiron, reflective metal sheet and trough can be cleaned in soapy water.
• Never use a steel brush or other scratching objects.
• Assemble all the parts as shown in the diagram.
This device has been tested according to all relevant current CE guidelines,
such as electromagnetic compatibility and low voltage directives, and has been
constructed in accordance with the latest safety regulations.
Subject to technical changes without prior notice!
34
23.12.2003 12:54 Uhr
Usage
Troubleshooting
Cleaning
Seite 34