Usb Device Operation; Maintenance - Seg BB 1322Princess Bedienungsanleitung

Stop playback
Press the button to stop playback. Press the
the first track.
Search function
Skip to the next/ previous track
1. Press the button to skip to the next track.
2. Press the button once to skip to the beginning of the current track. Press it
twice to skip to the previous track.
Search within a track
During playback, hold down the
and then release the button. Normal playback will resume from that point.
Skip to the next/ previous folder (for MP3/ WMA files only)
Press the FOLDER UP button to skip to the next/ previous folder.
Programmed playback
You can program up to 20 tracks.
1. In STOP mode, press the PROGRAM button and the track number "P01" will
flash.
2. Press the /
3. Press the PROGRAM button to confirm.
4. Repeat steps 2 and 3 above to program other tracks.
5. To play the program, press the
6. To clear the program, press the
compartment or go to standby mode.
When programming a CD containing MP3/ WMA files, you can press the
FOLDER UP button to select the folder in which you want to program the tracks.
Insert a USB device into the USB port. When the unit is switched on, set the
FUNCTION switch to select the "CD/USB" mode. In stop
mode, press the button to select "USB" mode. Refer to
"CD/ MP3 / WMA PLAYER OPERATION" to play MP3/
WMA files.
Note: Due to technical differences, some models of USB
storage devices or MP3 players may take longer to be read. In some cases,
they may not even be read.
USB stick should be direct connected or with a cable with max. 0.5 m length.
Cleaning CD discs
If the music skips or does not play, the disc may need cleaning. Before playback,
wipe the disc from the center out with a clean cloth. After use, store the disc in its
case.
or
buttons to select the track number.
button.

USB DEVICE OPERATION

MAINTENANCE

GB-6
button to start playback from
button to go fast backwards or forwards
button twice or open/close the CD