Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Detailed instructions are given on the following pages; also see section "5. What to do if...".
1. Switch the
appliance on
2. Select the right type
of detergent
3. Fill the detergent
dispenser
4. Check the rinse aid level
5. Set the water
hardness level
6. Check the salt level
7. Load the racks
8. Select a programme,
and start
9. Turn on the water tap,
close the door
Wash cycle
10.End of programme
11.Open the door
12.Turn off the water tap,
unload the racks
2
2. QUICK REFERENCE GUIDE
The dishwasher switches on automatically when any button is pressed, except for the
button. If no button is pressed within 30 seconds, the appliance switches to Energy
Saving mode.
Depending on the dishwasher model
Fill dishes: beware of hot steam! The Start
indicator blinks, press the Start button
again, the programme resumes from
where it had stopped (as happens after a
power shortage as well).
Change the programme
in progress:
- Press the Cancel/Off button.
- Close the door.
- (Water drains for up to 60 seconds).
- Open the door.
- Select a new programme.
- Press the START button.
Werbung
Inhaltsverzeichnis
