Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Caratec Vision
CAV246DSW
Bedienungsanleitung
User's Manual
Notice d'utilisation
CAV246DSW_Anleitung - Update 20170102.indd 1
10.01.2017 11:15:31

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Caratec Vision CAV246DSW

  • Seite 1 Caratec Vision CAV246DSW Bedienungsanleitung User‘s Manual Notice d‘utilisation CAV246DSW_Anleitung - Update 20170102.indd 1 10.01.2017 11:15:31...
  • Seite 2 Diese Anleitung ist einschließlich aller ihrer Teile urheberrechtlich geschützt. Jede Verwertung außerhalb der Grenzen des Urheberrechtsgesetzes ist ohne die schriftliche Zustimmung der Caratec GmbH unzulässig und strafbar. Dies gilt insbesondere für Vervielfältigungen, Übersetzungen, Mikroverfilmungen und die Einspeisung und Verarbeitung in elektronischen Systemen. Die Wiedergabe von Gebrauchsnamen, Handelsnamen, Warenbezeichnungen usw.
  • Seite 3: Inhaltsverzeichnis

    Inhalt 1. Allgemeine Hinweise ..................4 2. Lieferumfang .....................5 3. Inbetriebnahme und Bedienung ...............6 3.1. Montage .....................6 3.2. Bedientasten....................7 3.3. Anschlüsse am Gerät ................8 3.4. Fernbedienung...................9 3.5. Navigation in den Menüs ................10 4. Kurzanleitung zur Erstinbetriebnahme .............12 4.1. Anschluss Strom ..................12 4.2.
  • Seite 4: Allgemeine Hinweise

    1. Allgemeine Hinweise Um unnötige Schäden von Ihrem Gerät abzuwenden, beachten Sie bei Inbetriebnahme und Benutzung folgende Sicherheitshinweise: Montage an einem Wandhalter Vergewissern Sie sich, dass die Montageschrauben (M4) max. 8 mm in das Gerät ragen. Längere Schrauben können zu Beschädigungen am Gerät führen.
  • Seite 5: Lieferumfang

    2. Lieferumfang > LED TV-Gerät mit Standfuß > Fernbedienung mit 2 AAA-Batterien > 230V Netzteil (12V, 3A) > AV-Adapter > YPbPr-Adapter > 12 V KFZ-Anschlusskabel > DVB-T Magnetfußantenne > Anleitung CAV246DSW_Anleitung - Update 20170102.indd 5 10.01.2017 11:15:31...
  • Seite 6: Inbetriebnahme Und Bedienung

    3. Inbetriebnahme und Bedienung 3.1. Montage Montage Standfuß Legen Sie den Bildschirm auf eine flache, weiche Unterlage, um Beschädigungen zu vermeiden. 2. Verschrauben Sie den Standfuß von unten mit dem TV-Gerät. Verwenden Sie dazu die mitgelieferten 4 Schrauben. Stellen Sie vor dem Anbringen des Standfußes sicher, dass HINWEIS er richtig herum montiert wird (s.
  • Seite 7: Bedientasten

    3. Inbetriebnahme und Bedienung > Vergewissern Sie sich, dass die Montageschrauben (M4) max. 8 mm in das Gerät ragen. Längere Schrauben können zu Beschädigungen am Gerät führen. > Eine Wandhalterung ist separat erhältlich. HINWEIS Produktinformationen unter http://halter.caratec.de > Verwenden Sie eine für Größe und Gewicht des TV- Geräts geeignete Wandhalterung.
  • Seite 8: Anschlüsse Am Gerät

    3. Inbetriebnahme und Bedienung 3.3. Anschlüsse am Gerät Auf der Rückseite des Geräts können externe Geräte oder Quellen angeschlossen werden. An den Antenneneingängen können sowohl passive als auch aktive Antennen (mit integriertem Verstärker und eigener Spannungsversorgung) angeschlossen werden. Ein-/Ausschalter Bezeichnung Erklärung Ein-/Ausschalter Ein-/Ausschalter reduziert den Stromverbrauch auf 0...
  • Seite 9: Fernbedienung

    3. Inbetriebnahme und Bedienung 3.4. Fernbedienung Batterien in die Fernbedienung einlegen Öffnen Sie das Batteriefach der Fernbedienung. 2. Setzen Sie die mitgelieferten Batterien (AAA, 2 x 1,5 V) ein. Tastenbelegung Bezeichnung Erklärung POWER Ein-/Ausschalten, Standby POWER MUTE EJECT DVD auswerfen (im DVD-Betrieb) MUTE Stummschalten PICTURE...
  • Seite 10: Navigation In Den Menüs

    3. Inbetriebnahme und Bedienung Bezeichnung Erklärung INDEX Index aufrufen HOLD Videotext Unterseite halten (nicht umblättern) SIZE Videotext Hauptseite vergrößern/Unterseite vergrößern/Standardgröße SUBPAGE Videotext Unterseite aufrufen/beenden D.SET DVD-Einstellungen aufrufen D.MENU DVD-Hauptmenü aufrufen D.SUB DVD-Untertitel anzeigen D.LAN DVD-Sprache auswählen  Rückwärts  Vorwärts |...
  • Seite 11: Navigation Im Dvd-Menü

    3. Inbetriebnahme und Bedienung Aktion Bedienleiste Fernbedienung Zurück zur nächsthöheren Menüebene MENU MENU Menü verlassen MENU EXIT Beachten Sie auch die Navigationshinweise auf den einzelnen HINWEIS Menüs und Einstellungsmasken. Navigation im DVD-Menü Durch die Menüs können Sie sowohl mit der Fernbedienung als auch über die Bedientasten am Gerät navigieren.
  • Seite 12: Kurzanleitung Zur Erstinbetriebnahme

    4. Kurzanleitung zur Erstinbetriebnahme 4.1. Anschluss Strom Schließen Sie Ihr Gerät an einen geeigneten Stromanschluss an. 4.2. Einschalten des Geräts Schalten Sie das Gerät über den Ein-/Ausschalter ein und betätigen Sie die Taste POWER der Fernbedienung oder am Gerät. > Die Standby-Anzeige leuchtet grün, wenn das Gerät eingeschaltet ist. >...
  • Seite 13 4. Kurzanleitung zur Erstinbetriebnahme Empfangseinstellungen Empfangsart < Eingangsquelle Satellit > < Satellit Astra 19.2E > < Suchmodus Standard > < Kanal Art Alle Kanäle > < Alles Programm Art > Zurück Start MENU 5. Wählen Sie als Empfangsart DTV oder ATV + DTV. 6.
  • Seite 14: Erstinstallation Bei Empfang Über Dvb-C/Dvb-T

    4. Kurzanleitung zur Erstinbetriebnahme 4.4. Erstinstallation bei Empfang über DVB-C/DVB-T DVB-C: Verbinden Sie den Kabelanschluss mit dem DVB-C-Eingang des TV- Geräts. Oder: DVB-T/T-2 HD: Verbinden Sie die terrestrische Antenne mit dem DVB-T- Eingang des TV-Geräts. Falls Sie eine aktive Antenne ohne eigene Stromversorgung nutzen, schalten Sie im Menü...
  • Seite 15: Anschluss Über Externe Quellen

    4. Kurzanleitung zur Erstinbetriebnahme 6. Wählen Sie als Eingangsquelle > DVB-T, wenn Sie über Antenne empfangen. > DVB-C, wenn Sie über Kabel empfangen. Drücken Sie die Taste OK. > Der Dialog Sendersuchlauf wird angezeigt. Die Suche der TV- und Radio-Sender kann einige Minuten dauern. >...
  • Seite 16: Wichtige Hinweise Zur Bedienung

    4. Kurzanleitung zur Erstinbetriebnahme Anschluss über ein YPbPr-Kabel Verbinden Sie den YPbPr-Adapter mit dem MINI-YPbPr-Eingang des TV-Geräts. Verbinden Sie diesen mit dem YPbPR-Ausgang des externen Geräts. Verbinden Sie den AV-Adapter mit dem MINI-AV-Anschluss des TV-Geräts. Verbinden Sie diesen mit dem Audio-Ausgang des externen Geräts. Bitte beachten Sie die detaillierten Beschreibungen zur Auswahl der Eingangsquelle Kapitel...
  • Seite 17 4. Kurzanleitung zur Erstinbetriebnahme Teletext Mit der Taste TV/TXT der Fernbedienung öffnen bzw. schließen Sie den Teletext. Bitte beachten Sie die detaillierten Beschreibungen in Kapitel „9.7. Teletext“ auf Seite 42. EPG-Menü Mit der Taste EPG der Fernbedienung öffnen bzw. schließen Sie den Programmführer.
  • Seite 18: Hauptmenü

    5. Hauptmenü 5.1. Auswahl des Hauptmenüs Öffnen Sie das Hauptmenü durch Drücken der Taste MENU (Bedienleiste am Gerät oder Fernbedienung). 2. Wählen Sie die gewünschte Option aus und bestätigen Sie diese. Bitte beachten Sie die detaillierten Beschreibungen in Kapitel „3.5. Navigation in den Menüs“...
  • Seite 19 5. Hauptmenü Funktion Erklärung Manuellen Sendersuchlauf für die ausgewählte Quelle starten Manuelle Analog-Suche Menü „Manuelle Analog-Suche“ wird angezeigt Manuellen Sendersuchlauf für ausgewählte Quelle starten Manuelle DVB-C-Suche Menü „Manuelle DVB-C Suche“ bzw. „Manuelle DVB-T Suche“ wird Manuelle DVB-T-Suche angezeigt Kanäle ordnen, löschen, überspringen, als Favoriten kennzeichnen Kanalliste bearbeiten Menü...
  • Seite 20: Bei Ausgewählter Quelle Dtv

    5. Hauptmenü Bei ausgewählter Quelle DTV: Funktion Erklärung Land Land einstellen  ATV (Empfang analoge Sender) Empfangsart  DTV (Empfang digitale Sender)  ATV + DTV (Empfang analoge und digitale Sender)  Voll* Suchmodus  Netzwerksuche  Auto* Netzwerk ID ...
  • Seite 21 5. Hauptmenü Manuelle DVB-C Suche/Manuelle DVB-T Suche Wählen Sie im Menü Sender die Funktion Manuelle DVB-C Suche bei Kabelempfang bzw. Manuelle DVB-T Suche bei Antennenempfang. > Das Menü Manuelle DVB-C Suche bzw. Manuelle DVB-T Suche wird angezeigt. Kanalliste bearbeiten Wählen Sie im Menü Sender die Funktion Kanalliste bearbeiten. >...
  • Seite 22: Menü Bild

    5. Hauptmenü Spalte Erklärung Auflistung der Satelliten. Die Satelliteneinstellungen können bearbeitet Satelliten werden (grüne Farbtaste). Es ist außerdem möglich Satelliten zu löschen (rote Farbtaste) und hinzuzufügen (gelbe Farbtaste). Auflistung der zum ausgewählten Satelliten (Spalte „Satellit“) gehörenden Transponder. Die Transpondereinstellungen können bearbeitet werden Transponder (grüne Farbtaste).
  • Seite 23: Menü Ton

    5. Hauptmenü Funktion Erklärung Schärfe Bildschärfe einstellen Farbtemperatur einstellen:  Normal Farbtemperatur  Warm  Kalt Rauschunterdrückung einstellen:  Niedrig Rauschunterdrückung  Mittel  Hoch  Aus PC-Einstellung Position und Größe des PC-Bildes einstellen  Ein Dyn. Kontrast  Aus Gesichtsfarbe Gesichtsfarbe einstellen ...
  • Seite 24: Menü Uhrzeit

    5. Hauptmenü Funktion Erklärung Bässe Tiefen einstellen Balance Balance zwischen rechtem und linkem Lautsprecher einstellen Automatische Lautstärkenregelung: Autom. Lautstärke  Ein  Aus Surround-Wiedergabe:  Aus Surround Sound  SRS TruSurround  TruSurround Modus des digitalen Audioausgangs einstellen: SPDIF Mode ...
  • Seite 25 5. Hauptmenü Funktion Erklärung Anzeige Datum und Uhrzeit (wird automatisch eingestellt) Zeitzone Zeitzone einstellen Ausschaltzeit für das TV-Gerät einstellen Ausschaltzeit Menü „Ausschaltzeit“ wird angezeigt Einschaltzeit für das TV-Gerät einstellen Einschaltzeit Menü „Einschaltzeit“ wird angezeigt Zeit einstellen, nach der sich das Gerät automatisch ausschaltet Sleep Timer ...
  • Seite 26: Menü Konfiguration

    5. Hauptmenü Funktion Erklärung  Aus  Einmal  Täglich Einschaltzeit  Mo-Fr  Mo-Sa  Sa-So  So Stunde Uhrzeit einstellen (Stunden) Minute Uhrzeit einstellen (Minuten) Quelle Eingangsquelle auswählen, mit der das Gerät eingeschaltet werden soll Sender Sender auswählen, mit dem das Gerät eingeschaltet werden soll Lautstärke Lautstärke auswählen, mit der das Gerät eingeschaltet werden soll 5.6.
  • Seite 27: Menü Schutz

    5. Hauptmenü Funktion Erklärung Version Version (Modell, Paneltyp und Softwareversion) anzeigen Standardsenderliste ASTRA/HOTBIRD laden (trifft nur für Satelliten- Standardsenderliste empfang zu) 5.7. Menü Schutz Öffnen Sie das Hauptmenü durch Drücken der Taste MENU (Bedienleiste am Gerät oder Fernbedienung). SCHUTZ 2. Wählen Sie Schutz aus und bestätigen Sie mit der Taste OK. >...
  • Seite 28: Sender Sperren

    5. Hauptmenü Sender sperren Wählen Sie im Menü Schutz die Funktion Sender sperren. > Das Menü Sender sperren wird angezeigt. 2. Sperren bzw. entsperren Sie die gewünschten Sender und bestätigen Sie. Hotel Modus Wählen Sie im Menü Schutz die Funktion Hotel Modus. >...
  • Seite 29: Ci-Modul

    6. CI-Modul 6.1. Common Interface (CI) Das Gerät verfügt über einen CI-Schacht und unterstützt sowohl CI als auch CI+. Ein CI-Modul ist eine kreditkartengroße Steckkarte, die in den CI-Schacht Ihres DVB-Empfangsgeräts passt und wiederum eine Smartcard aufnehmen kann. Mit dieser Kombination haben Sie Zugang zu verschlüsselten, zahlungspflichtigen Programmen.
  • Seite 30: Multimedia-Betrieb

    7. Multimedia-Betrieb 7.1. Voraussetzungen Sie können die auf einem USB-Medium gespeicherten Daten abspielen, wenn die folgenden Dateiformate auf dem Speichermedium gespeichert sind: Medien Dateiformat *.dat, *.mpg, *mpeg *.vob *.mkv Film *.mp4, *.mov *.avi *.flv *.asf, *.wmv *.mp3 *.wav Musik *.wma/asf *.aac *.ac3 *.jpg, *.jpeg...
  • Seite 31 7. Multimedia-Betrieb 4. Wählen Sie den Speicherplatz (C) des Mediums und ggf. den Unterordner aus. Die vorhandenen Dateien werden angezeigt. 5. Wählen Sie die gewünschte Datei aus. Durch Drücken der grünen Farbtaste auf der Fernbedienung markieren Sie alle Dateien (z.B. Fotos oder Musik) zur Wiedergabe 6.
  • Seite 32 7. Multimedia-Betrieb Funktion Erklärung Playlist Zeigt die Wiedergabeliste Info Zeigt Dateiinfo Slow-Motion-Wiedergabe Rück Schrittweise Wiedergabe Goto Time Zu Wiedergabezeit springen Zoom In Vergrößert den Film Zoom Out Verkleinert den Film Auto Bildformat 16:9 Bewegen Ansicht im vergrößerten Film mit den Pfeiltasten bewegen Musik Funktion Erklärung...
  • Seite 33: Beenden Der Wiedergabe

    7. Multimedia-Betrieb Foto Funktion Erklärung Pause/Abspielen Diashow anhalten und wieder starten Prev. Vorheriges Bild Next Nächstes Bild Stop Anhalten RepeatNone Keine Wiederholung Repeat1 Wiederholung des aktuellen Films RepeatALL endlose Wiedergabe aller Filme Musik Spielt während der Diashow Musik vom USB-Medium ab Playlist Zeigt die Wiedergabeliste Info...
  • Seite 34: Dvd-Betrieb

    8. DVD-Betrieb 8.1. Einlegen der DVD Zum Einlegen einer DVD gehen Sie vor wie folgt: Schalten Sie das TV-Gerät ein. 2. Drücken Sie die Taste INPUT auf der Fernbedienung und wählen Sie die Quelle DVD aus. 3. Führen Sie die DVD mit der beschrifteten Seite nach hinten langsam in das DVD-Laufwerk ein.
  • Seite 35: Allgemeine Einstellungen

    8. DVD-Betrieb 8.4. Allgemeine Einstellungen Zum Anzeigen der DVD-Einstellungen gehen Sie vor wie folgt: Drücken Sie die Taste D.SET auf der Fernbedieung. > Das Menü Allgemeine Einstellungen wird angezeigt. - - Al lg e me in e Ein s te l lu n g e n - - T V- An ze i g e Wi d e An z e i g e sp r a c h e...
  • Seite 36: Benutzereinstellungen

    8. DVD-Betrieb 2. Drücken Sie im Menü Allgemeine Einstellungen die Pfeiltaste (rechts) auf der Fernbedienung und wählen Sie das Lautsprechersymbol aus. > Das Menü Audioeinstellungen wird angezeigt. - - Au d i o e in s te l lu n g e n - - D o w n mix ST R Bitte beachten Sie die detaillierten Beschreibungen in Kapitel „3.5.
  • Seite 37: Dvd-Fernbedienung

    8. DVD-Betrieb Bitte beachten Sie die detaillierten Beschreibungen in Kapitel „3.5. Navigation in den Menüs“ auf Seite 10. Funktion Erklärung  PAL TV-Typ  Multi  NTSC Audio Audiosprache einstellen Untertitel Untertitelsprache einstellen Diskmenü Diskmenüsprache einstellen Altersstufen Altersstufe einstellen Passwort Passwort ändern (Standardpasswort lautet: 1234) Standardeinstellung Auf die Standardeinstellungen zurücksetzen...
  • Seite 38: Spezielle Funktionen

    9. Spezielle Funktionen 9.1. Anzeige Kanalliste Zum Aufrufen der Kanalliste gehen Sie vor wie folgt: Drücken Sie die Taste CH.LIST auf der Fernbedienung oder drücken Sie die Taste OK der Fernbedienung (nur wenn kein Menü angezeigt ist). > Das Menü Kanalliste wird angezeigt. ◄...
  • Seite 39: Favoriten

    9. Spezielle Funktionen 2. Wählen Sie den gewünschten Kanal aus und drücken Sie auf OK. Um die Kanalliste zu bearbeiten (Kanäle löschen, bewegen, überspringen, zur Favoritenliste hinzufügen), wählen Sie im HINWEIS Menü Sender die Funktion Kanalliste bearbeiten. Siehe auch „5.2. Menü Sender“ auf Seite 18. 9.2.
  • Seite 40: Kanalinfo

    9. Spezielle Funktionen 9.3. Kanalinfo Zum Aufrufen der Kanalinformation gehen Sie vor wie folgt: Drücken Sie die Taste DISPLAY auf der Fernbedienung. > Informationen über den Kanal werden angezeigt. 9.4. Untertitelsprache Zum Anzeigen der Untertitelsprache gehen Sie vor wie folgt: Drücken Sie die Taste SUBTITLE auf der Fernbedienung.
  • Seite 41: Programmführer (Epg)

    9. Spezielle Funktionen 9.5. Programmführer (EPG) Zum Anzeigen des Programmführers gehen Sie vor wie folgt: Drücken Sie die Taste EPG auf der Fernbedienung. > Das Menü Programmführer wird angezeigt. PROGRAMM-FÜHRER 05:30 - 09:00 28 Jun 2016 Nachrichten/Aktuelles Moderation: Susan Link und Till Nassif * EM Gipfel - Großbritannien nach dem Referendum: Wie positionieren sich die EU und die deutsche Regierung? * Bundesteilhabegesetz im Kabinett: Betroffene sollen mehr Vermögen als heute behalten dürfen * Hype ums Nähen: Immer mehr Leute wollen wieder Handarbeit lernen und ihre Kleudung selber machen...
  • Seite 42: Teletext

    9. Spezielle Funktionen 9.7. Teletext Teletext wird von den meisten TV-Sendern als kostenloser Service zur Verfügung gestellt. Er bietet verschiedenartige Informationen, z. B. News Ticker und tagesaktuelle Nachrichten, Wettervorhersage, Informationen zu den Bereichen Wirtschaft, Sport, Kultur, Ratgeber usw., sowie Informationen zum TV-Programm. Drücken Sie die Taste TV/TXT auf der Fernbedienung.
  • Seite 43: Fehlersuche

    10. Fehlersuche Problem Aktion Stellen Sie sicher, dass das Netzkabel korrekt angeschlossen ist. Gerät lässt sich nicht Stellen Sie sicher, dass der Ein-/Ausschalter auf der Unterseite des einschalten Geräts eingeschaltet ist. Stellen Sie sicher, dass die Polarität der Stromversorgung korrekt ist. Stellen Sie sicher, dass die entsprechende Quelle (INPUT) ausgewählt ist.
  • Seite 44: Spezifikation

    11. Spezifikation Technische Daten LED TV CAV246DSW (Art.-Nr. CAV246DSW) Auflösung (in Pixel) 1920 x 1080 (Full HD) Bildformat 16:9 Kontrastverhältnis 3.000:1 Helligkeit 250 cd/m Sichtwinkel (R/L/O/U) 89°/89°/89°/89° Lautsprecher 2 x 3 Watt (Stereo) Analog TV-Tuner DVB-T2 HD (H.265) Tuner DVB-S2 Tuner...
  • Seite 45 CAV246DSW_Anleitung - Update 20170102.indd 45 10.01.2017 11:15:44...
  • Seite 46 CAV246DSW_Anleitung - Update 20170102.indd 46 10.01.2017 11:15:44...
  • Seite 47 Content 1. General Information ..................48 2. Delivery Contents .....................49 3. Set-Up and Use ....................50 3.1. Assembly ....................50 3.2. Control Buttons ..................51 3.3. Connections to the television set .............52 3.4. Remote Control ..................53 3.5. Navigating within the menus ..............54 4. Quick Set-Up ....................56 4.1.
  • Seite 48: General Information

    1. General Information To avoid damaging the television set please observe the following safety instructions during setup and use. Attaching to a wall mount Please ensure that the screws (M4) project into the television set by no more than 8 mm. The use of longer screws can damage the television set.
  • Seite 49: Delivery Contents

    2. Delivery Contents > LED television set with stand > Remote control with 2 AAA batteries > 230 volt power supply unit (12 volt, 3 amp) > AV adapter > YPbPr adapter > 12 volt cable for use with motor vehicle >...
  • Seite 50: Set-Up And Use

    3. Set-Up and Use 3.1. Assembly Stand Assembly To avoid damage, place the screen on a soft flat surface. 2. Attach the stand to the underside of the television set by means of the four screws provided. Before attaching the stand ensure that it is the right way NOTE round (see the illustration).
  • Seite 51: Control Buttons

    3. Set-Up and Use > Make sure that the mounting screws (M4) project into the television set by no more than 8 mm. Longer screws can damage the set. > A wall bracket can be bought separately. NOTE Product information available at http://halter.caratec.de >...
  • Seite 52: Connections To The Television Set

    3. Set-Up and Use 3.3. Connections to the television set External devices or sources can be connected at the rear of the television set. Both passive and active antennas (with integrated amplifier and their own power source) can be connected to the antenna input. on/off switch Designation Explanation...
  • Seite 53: Remote Control

    3. Set-Up and Use 3.4. Remote Control Place batteries in the remote control Open the battery compartment of the remote control. 2. Insert the batteries provided (AAA, 2 x 1.5 volts). Key Assignment Designation Explanation POWER On/off, standby POWER MUTE EJECT Eject DVD (in DVD mode) MUTE...
  • Seite 54: Navigating Within The Menus

    3. Set-Up and Use Designation Explanation INDEX Opening Index HOLD Keep teletext sub-page (do not go to next page) SIZE Enlarging teletext main page/enlarging sub-page/standard size SUBPAGE Opening/closing teletext sub page D.SET Displaying DVD settings D.MENU Displaying DVD main menu D.SUB Displaying DVD subtitles D.LAN...
  • Seite 55 3. Set-Up and Use Aktion Bedienleiste Fernbedienung Back to next menu level up MENU MENU Exiting menu MENU EXIT Follow the navigation instructions in the individual menus and NOTE set-up masks. Navigating within the DVD menu You can move through the menus with either the remote control or the buttons on the television set.
  • Seite 56: Quick Set-Up

    4. Quick Set-Up 4.1. Electrical Connection Connect the television set to a suitable power supply. 4.2. Turning the television set on Turn on the television set using the on/off switch and press the POWER button on the remote control or on the device. >...
  • Seite 57 4. Quick Set-Up Tuning Setup Tune Type < Digital Type Satellite > < Satellite Astra 19.2E > < Scan Mode Default > < Channel Type All Channels > < Service Type > Back Start MENU 5. Select DTV or ATV + DTV as the receiving mode (Tune Type). 6.
  • Seite 58: Initial Installation For Reception Via Dvb-C/Dvb-T

    4. Quick Set-Up 4.4. Initial Installation for Reception via DVB-C/DVB-T. DVB-C: Connect the cable connection to the DBV-C input of the television set. DVB-T/T-2 HD: Connect the terrestrial antenna to the DVBT-input of the television set. If using an active antenna without independent power supply in the menu switch the „5V antenna power“...
  • Seite 59: Connection To External Sources

    4. Quick Set-Up 6. Select the input source (Digital Type) > DVB-T for input from an antenna, > DVB-C for cable input. Press OK. > The station search dialogue box is displayed (Auto Tuning Status) The TV and radio station search may last several minutes. >...
  • Seite 60: Important Operating Instructions

    4. Quick Set-Up Connection via a YPbPr Cable Connect the YPbPr adapter to the MINI YPbPr-input of the television set. Connect the adapter to the YPbPr-output of the external device. Connect the AV adapter to the MINI AV-input of the television set. Connect the adapter to the audio cable and insert the cable into the audio-output of the external device.
  • Seite 61 4. Quick Set-Up Teletext Turn the Teletext on or off by using the TV/TXT button on the remote control. Please follow the detailed description in Chapter „9.7. Teletext“ on page 86. EPG-Menu Use the EPG button on the remote control to turn the programme guide on or off.
  • Seite 62: Main Menu

    5. Main Menu 5.1. Selecting the Main Menu Open the main menu by pressing the MENU button (control panel on the television set or remote control). 2. Select and confirm the desired option. Please follow the detailed description in chapter „3.5. Navigating within the menus“...
  • Seite 63 5. Main Menu Funktion Erklärung Begin manual channel search for the selected source ATV Manual Tuning „ATV Manual Tuning“ menus are displayed. DVB-C Manual Tuning Beginning manual channel search for selected source. „DVB-C Manual DVB-T Manual Tuning Tuning“ or „DVB-T Manual Tuning“ menus are displayed Organising, deleting, skipping, marking as favourites.
  • Seite 64 5. Main Menu With DTV selected as source: Function Explanation Country Set country  ATV (for reception of analogue channels) Tune Type  DTV (for reception of digital channels)  ATV + DTV (for reception of analogue and digital channels) ...
  • Seite 65: Satellite Configuration

    5. Main Menu Manual DVB-C Search/Manual DVB-T Search In the Channel Menu select the CADTV Manual Tuning if on cable, or DTV Manual Tuning if receiving via antenna. > The Menu CADTV Manual Tuning or DTV Manual Tuning is displayed. Managing List of Channels In the Channels Menu select Programme Edit.
  • Seite 66: Picture Menu

    5. Main Menu Column Explanation Satellite list. The satellite settings can be edited (green button). It is also Satellite possible to delete satellites (red button) and to add satellites (yellow button). List of the transponders corresponding to the selected satelliten („Satellite“...
  • Seite 67: Sound Menu

    5. Main Menu Function Explanation Setting colour temperature:  Normal Colour Temp  Warm  Cold Setting noise reduction:  Low Noise Reduction  Medium  High  Off Screen Setting position and size of the PC image  On Dynamic CR ...
  • Seite 68: Time Menu

    5. Main Menu Function Explanation Bass Adjust Bass Balance Setting balance between left and right speakers Automatic volume control: Auto Volume  On  Off Surround reproduction:  Off Surround Sound  SRS TruSurround  TruSurround Setting digital audio output: SPDIF Mode ...
  • Seite 69 5. Main Menu Function Explanation Clock Time and date display (set automatically) Time Zone Setting time zone Setting switch-off time for the television Off Time „Off Time“ Menu is displayed Setting switch-on time for the television On Time „On Time“ Menu is displayed Setting time after which the television set automatically switches off Sleep Timer ...
  • Seite 70: Setup Menu

    5. Main Menu Function Explanation  Off  Once  Everyday On Time  Mon-Fri  Mon-Sat  Sat-Sun  Sun Hour Setting time (Hour) Minute Setting time (Minute) Selecting input source for playback when the television set is to be Source turned on.
  • Seite 71: Lock Menu

    5. Main Menu Function Explanation Version Displaying version (Model, panel type, and software version) Loading ASTRA/HOTBIRD standard channel list (only for satellite Import DefaultData reception) 5.7. Lock Menu Display the Main Menu by pressing the MENU button (control panel on the television set or the remote control). LOCK 2.
  • Seite 72: Hotel Mode

    5. Main Menu Locking Channels In the Lock Menu select Channel Lock. > The Channel Lock Menu is displayed. 2. Lock or release the desired channels and confirm. Hotel Mode In the Lock Menu select Hotel Mode. > The Hotel Mode Menu is displayed. Function Explanation ...
  • Seite 73: Ci-Modul

    6. CI module 6.1. Common Interface (CI) The television set has a CI slot and supports both CI and CI+. A CI module is a plug-in card the size of a credit card which fits into the slot of your DVB receiver and which in turn can also hold a smart card.
  • Seite 74: Multimedia Operation

    7. Multimedia Operation 7.1. Prerequisites You can play back files saved on a USB device if the following file formats are on the storage device: Medium Format *.dat, *.mpg, *mpeg *.vob *.mkv Movie *.mp4, *.mov *.avi *.flv *.asf, *.wmv *.mp3 *.wav Music *.wma/asf...
  • Seite 75 7. Multimedia Operation 4. Select the storage location (C) of the medium and, if necessary, the subfolder. The files already present are displayed. 5. Select the desired file. Use the green button on the remote control to mark the files (e.g. photos or music) to be shown/played. 6.
  • Seite 76 7. Multimedia Operation Function Explanation Info Displays movie info Slow Slow-motion playback Step Stop-start playback Goto Time Jump to playback time Zoom In Increases film size Zoom Out Decreases film size Auto Aspect Ratio 16:9 Move View Move image in increased-size film with the arrow keys Music Function Explanation...
  • Seite 77: Ending Playback

    7. Multimedia Operation Photo Function Explanation Pause/Play Stopping then re-starting slide show Prev. Previous image Next Next image Stop Stop RepeatNone No repeat Repeat1 Repeat current image RepeatALL Non-stop playback of all images Musik Plays music from USB device during slide show Playlist Shows the play-back list Info...
  • Seite 78: Dvd Operation

    8. DVD Operation 8.1. Inserting the DVD To insert the DVD proceed as follows: Turn on the television set. 2. Press the INPUT button on the remote control and select DVD as source. 3. Insert the DVD with the label side facing backwards slowly into the DVD drive.
  • Seite 79: General Settings

    8. DVD Operation 8.4. General Settings To display the DVD settings proceed as follows: Press the D.SET button on the remote control. > The General Setup Page is displayed. - - Ge n e r a l Se tu p P a g e - - T V D i sp l a y Wi d e O SD L a n g...
  • Seite 80: User Settings

    8. DVD Operation 2. In the General Setup Page press the right-hand arrow key on the remote control and select the speaker symbol. > The Audio Setup Page is displayed. - - Au d i o Se tu p Pa g e -- D o w n mix ST R Please follow the detailed description in Chapter „3.5.
  • Seite 81: Dvd Remote Control

    8. DVD Operation Please follow the detailed description in the Chapter „3.5. Navigating within the menus“ on page 54. Function Explanation  PAL TV System  Multi  NTSC Audio Select audio language Subtitle Select subtitel language Menu Select menu language Parental Ctrl Select age category Password...
  • Seite 82: Special Functions

    9. Special Functions 9.1. Channel Display To open the channel list proceed as follows: Press the CH.LIST button on the remote control or press the OK button on the remote control (only if no menu is displayed). > The Channel List Menu is displayed. ◄...
  • Seite 83: Favourites

    9. Special Functions 2. Select the desired channel and press OK. To edit the channel list (delete, move, skip, add to favourites), NOTE in the Channel Menu select Programme edit. See also „5.2. Channel Menu“ on page 62. 9.2. Favourites To open the favourites list proceed as follows: Press the FAV button on the remote control.
  • Seite 84: Channel Information

    9. Special Functions 9.3. Channel Information To open channel information, proceed as follows: Press the DISPLAY button on the remote control. > Channel Information is displayed. 9.4. Subtitle Language To display the subtitle language, proceed as follows: Press the SUBTITLE button on the remote control. >...
  • Seite 85: Programme Guide (Epg)

    9. Special Functions 9.5. Programme Guide (EPG) To display the programme guide proceed as follows: Press the EPG button on the remote control. > The 7 Day TV Guide Menu is displayed. 7 Day TV Guide 05:30 - 09:00 28 Jun 2016 News/Current Affairs Moderation: Susan Link und Till Nassif * EM Gipfel - Großbritannien nach dem Referendum: Wie positionieren sich die EU und die deutsche Regierung?
  • Seite 86: Teletext

    9. Special Functions 9.7. Teletext Teletext is made available free of charge by most TV stations. It provides various types of information, e.g. News Ticker and updated news, weather forecasts, information on business, sport, culture, advice services, etc. and also on television programming.
  • Seite 87: Trouble Shooting

    10. Trouble Shooting Problem Action Make sure that the power cable is properly inserted. Television set cannot be Make sure that the On/Off switch on the bottom of the television set turned on is turned on. Make sure that the polarity of the power supply is correct. Make sure that the correct source (INPUT) is selected.
  • Seite 88: Specification

    11. Specification Technical Data LED TV CAV246DSW (Part-no. CAV246DSW) Resolution (Pixel) 1920 x 1080 (Full HD) Image format 16:9 Contrast ratio 3.000:1 Brightness 250 cd/m Viewing angle (R/L/T/B) 89°/89°/89°/89° Loudspeaker 2 x 3 Watt (Stereo) Analog TV-Tuner DVB-T2 HD (H.265) Tuner...
  • Seite 89 CAV246DSW_Anleitung - Update 20170102.indd 89 10.01.2017 11:15:55...
  • Seite 90 CAV246DSW_Anleitung - Update 20170102.indd 90 10.01.2017 11:15:55...
  • Seite 91 Contenu 1. Recommandations générales ................. 92 2. Compris dans la livraison ................93 3. Mise en service et utilisation ................94 3.1. Montage ....................94 3.2. Touches de commande ................95 3.3. Raccordements à l‘appareil ..............96 3.4. Télécommande ..................97 3.5.
  • Seite 92: Recommandations Générales

    1. Recommandations générales Pour éviter des dommages inutiles sur votre appareil, veuillez respecter les consignes de sécurités suivantes lors de la mise en service et de l’utilisation : Montage au support mural Assurez-vous que les vis de montage (M4) ne pénètrent pas plus de 8 mm dans l’appareil.
  • Seite 93: Compris Dans La Livraison

    2. Compris dans la livraison > téléviseur LED avec pied support > télécommande avec 2 piles AAA > câble d’alimentation 230V (12V, 3A) > adaptateur AV > adaptateur YPbPr > câble allume-cigare 12 V > antenne DVB-T, magnétique > notice d’utilisation CAV246DSW_Anleitung - Update 20170102.indd 93 10.01.2017 11:15:56...
  • Seite 94: Mise En Service Et Utilisation

    3. Mise en service et utilisation 3.1. Montage Montage du pied support Posez l’écran sur un support plat et souple, afin d’éviter des dommages. 2. Visser le pied support au téléviseur par le bas. Utilisez à cet effet les 4 vis comprises dans la livraison.
  • Seite 95: Touches De Commande

    3. Mise en service et utilisation > Assurez-vous que les vis de montage (M4) ne pénètrent pas plus de 8 mm dans l’appareil. Des vis plus longues pourraient endommager l’appareil. > Un support mural est disponible en option. NOTE Informations produit à l’adresse http://halter.caratec.de >...
  • Seite 96: Raccordements À L'appareil

    3. Mise en service et utilisation 3.3. Raccordements à l’appareil A l’arrière de l’appareil, il est possible de brancher des appareils ou des sources externes. Au niveau des entrées antennes, il est possible de brancher des antennes passives et actives (avec amplificateur intégré et alimentation autonome). Interrupteur marche/arrêt Désignation Explication...
  • Seite 97: Télécommande

    3. Mise en service et utilisation 3.4. Télécommande Placer les piles dans la télécommande Ouvrez le logement à piles de la télécommande. 2. Mettez en place les piles livrées (AAA, 2 x 1,5 V). Fonction des touches Désignation Explication POWER Marche/arrêt, veille POWER MUTE...
  • Seite 98: Navigation Dans Les Menus

    3. Mise en service et utilisation Désignation Explication NICAM/A2 Sélectionner entre NICAM/A2 INDEX Afficher l’index HOLD Maintenir la partie inférieure de la page télétexte (ne pas feuilleter) Agrandir/la page principale télétexte/agrandir la partie inférieure de la page/taille SIZE standard SUBPAGE Afficher/quitter la page inférieure télétexte D.SET Afficher les réglages du DVD...
  • Seite 99 3. Mise en service et utilisation panneau de Fonction télécommande commande Confirmer les réglages INPUT Confirmer les réglages et quitter l‘écran de réglage MENU Retour au niveau de menu immédiatement supérieur MENU MENU Quitter le menu MENU EXIT Respectez également les indications de navigation dans les NOTE différents menus et écrans de réglage.
  • Seite 100: Guide De Démarrage Rapide Pour La Première Mise En Service

    4. Guide de démarrage rapide pour la première mise en service 4.1. Etablir l’alimentation électrique Brancher votre appareil à une alimentation électrique adaptée. 4.2. Mise en marche de l’appareil Mettez en marche l’appareil par l‘interrupteur marche/arrêt et actionnez la touche POWER de la télécommande ou de l‘appareil. >...
  • Seite 101 4. Guide de démarrage rapide pour la première mise en service Tuning Setup Type de syntonisa... < Type numérique Satellit > < Satellite Astra 19.2E > < Scan Mode Préréglée > < Channel Type All Channels > < Tous Service Type >...
  • Seite 102: Première Installation Avec Réception Dvb-C/Dvb-T

    4. Guide de démarrage rapide pour la première mise en service 4.4. Première installation avec réception DVB-C/DVB-T DVB-C: raccordez la prise de connexion à l’entrée DVB-C du téléviseur. Ou : DVB-T/T-2HD: raccordez l’antenne terrestre à l’entrée DVBT du téléviseur. Si vous utilisez une antenne active (sans alimentation propre), activez la fonction 5V Antenne active: Activé...
  • Seite 103: Connexions Avec Sources Extérieures

    4. Guide de démarrage rapide pour la première mise en service 6. Sélectionnez comme source d’entrée (Type numérique) : > DVB-T, si la réception se fait par l’antenne. > DVB-C, si la réception se fait par câble. Appuyez sur la touche OK. >...
  • Seite 104: Indications Importantes Relatives À L'utilisation

    4. Guide de démarrage rapide pour la première mise en service Connexion par un câble YPbPr Connectez l’adaptateur YPbPr avec le connecteur MINI-YPbPr du téléviseur. Connectez celui-ci avec la sortie YPbPr de l’appareil externe. Connectez l’adaptateur AV avec le connecteur MINI-AV du téléviseur. Connectez celui-ci avec la sortie audio de l’appareil externe.
  • Seite 105 4. Guide de démarrage rapide pour la première mise en service Téletexte Ouverture ou fermeture du télétexte par la touche TV/TXT. Trouvez les descriptions détaillées sans le chapitre „9.7. Téletexte“ à la page 130. Menu EPG La touche EPG de la télécommande permet d’ouvrir ou de fermer l’aperçu des programmes.
  • Seite 106: Menu Principal

    5. Menu Principal 5.1. Sélection du menu principal Ouvrir le menu principal en appuyant sur la touche MENU (panneau de commande à l’appareil ou télécommande). 2. Sélectionnez l’option souhaitée et confirmez-là. Trouvez les descriptions détaillées sans le chapitre „3.5. Navigation dans les menus“...
  • Seite 107 5. Menu Principal Fonction Explication Démarrer la recherche manuelle des chaînes pour la source sélectionnée Réglage manuel ATV Le menu „Réglage manuel ATV“ s’affiche Démarrer la recherche manuelle des chaînes pour la source sélectionnée Réglage manuel DVB-C Le menu „Réglage manuel DVB-C“ ou „Réglage manuel DVB-T“ Réglage manuel DVB-T s’affiche Classer, supprimer, verrouiller ou désigner les chaînes comme favorites...
  • Seite 108: Recherche Manuelle Analogique

    5. Menu Principal Source DTV sélectionnée: Fonction Explication Pays Régler le pays  ATV (réception programmes analogiques) Type de syntonisation  DTV (réception programmes numériques) automatique  ATV + DTV (réception programmes analogiques et numériques)  Plein* Type de recherche ...
  • Seite 109 5. Menu Principal Recherche DVB-C manuelle/Recherche DVB-T manuelle Sélectionnez dans le menu Canal la fonction Syntonisation manuelle CADTV pour réception par câble ou Réglage manuel DTV pour réception par antenne. > Le menu Syntonisation manuelle CADTV ou Réglage manuel DTV s’affiche.
  • Seite 110: Menu Image

    5. Menu Principal Colonne Explication Liste des satellites. Les réglages des satellites peuvent être modifiés Satellite (touche verte). Il est par ailleurs possible d’effacer des satellites (touche rouge) et de les rajouter (touche jaune). Liste des transpondeurs correspondant au satellite sélectionné (colonne „Satellite“).
  • Seite 111: Menu Son

    5. Menu Principal Fonction Explication Netteté Régler la netteté de l’image Farbtemperatur einstellen:  Normale Température de couleur  Chaud  Froide Réglage de la réduction des bruits parasites :  Basse Réduction du bruit  Med  Élevée  Désactivée ECRAN Réglage de la position et du format de l’image PC ...
  • Seite 112: Menu Heure

    5. Menu Principal Fonction Explication Graves Réglage des graves Equilibrage Réglage de la balance entre le haut parleur droit et gauche Réglage automatique du volume du son : Volume auto  Activé  Désactivée Reproduction du surround :  Désactivée Son Surround ...
  • Seite 113 5. Menu Principal Fonction Explication Horloge Affichage de la date et de l’heure (réglage automatique) Fuseau horaire Réglage du fuseau horaire Réglage l’heure d’arrêt automatique du téléviseur Heure d´arrêt Le menu „Heure d´arrêt“ s’affiche Réglage de l’heure de mise en service du téléviseur Heure d´allumage Le menu „Heure d´allumage“...
  • Seite 114: Menu Paramètres

    5. Menu Principal Fonction Explication  Désactivée  Une fois  Tous les jours Heure d´allumage  Lun-Ven  Lun-Sam  Sam-Dim  So Heure Régler l’heure (Heure) Minute Régler l’heure (Minute) Sélectionner la source d’entrée par laquelle le téléviseur doit être mis Source en service Sélectionner le canal d’entrée par laquelle le téléviseur doit être mis en...
  • Seite 115: Menu Verrouillage

    5. Menu Principal Fonction Explication Version Version (modèle, type d’écran et version de logiciel) Charger la liste des canaux standard ASTRA/HOTBIRD (uniquement Import DefaultData pour la réception par satellite) 5.7. Menu Verrouillage Ouvrez le menu principal en appuyant sur la touche MENU (panneau de commande de l’appareil ou télécommande).
  • Seite 116 5. Menu Principal Bloquer une chaîne Sélectionner dans le menu Verrouillage la fonction Verrouillage chaîne. > Le menu Verrouillage chaîne s’affiche. 2. Bloquez ou déverrouillez les programmes souhaités et confirmez. Mode d´hôtel Sélectionnez dans le menu Verrouillage la fonction Mode d´hôtel. >...
  • Seite 117: Module Ci

    6. Module CI 6.1. Common Interface (CI) Le téléviseur est doté d’un connecteur d’interface commune permettant de recevoir l’interface CI et CI+. Un module CI est une carte enfichable de la taille d’une carte de crédit qui s’adapte dans le logement CI de votre récepteur DVB et qui peut recevoir des Smartcard. Cette combinaison vous permet l’accès aux programmes cryptés et payants.
  • Seite 118: Lecture Des Médias

    7. Lecture des médias 7.1. Conditions Vous pouvez lire des données enregistrées sur un périphérique USB, si les formats de fichiers suivants sont enregistrés sur le périphérique de stockage : Médias Formats *.dat, *.mpg, *mpeg *.vob *.mkv Video *.mp4, *.mov *.avi *.flv *.asf, *.wmv...
  • Seite 119 7. Lecture des médias Sélectionnez l’emplacement mémoire (C) du média et le cas échéant le sous- répertoire. Les fichiers disponibles s’affichent. 2. Sélectionnez le fichier souhaité. En appuyant sur la touche verte de la télécommande, vous marquez tous les fichiers (par ex. photos ou musique) à lire.
  • Seite 120 7. Lecture des médias Fonction Explication Info Affiche les informations fichier Lentement Lecture slow-motion Lecture continue Passer sur le temps Aller à la durée de lecture Zoom In Agrandit le film Zoom Out Réduit le film Auto Ratio d’aspect 16:9 Déplacer l‘image Déplacer la vue dans le film agrandi en déplaçant les touches à...
  • Seite 121: Terminer La Lecture

    7. Lecture des médias Photo Fonction Explication Pause/Lecture Arrêter la photo/redémarrer Précédent Dernière image Suivant Image suivante Arrêter Arrêter RepeatNone Pas de répétition Repeat1 Répétition du film en cours RepeatALL lecture continue de tous les films Musique Transmet de la musique depuis le médium USB pendant le diaporama Liste de compositions Affiche la liste de lecture Info...
  • Seite 122: Lire Un Dvd

    8. Lire un DVD 8.1. Insérer un DVD Pour insérer un DVD procédez de la manière suivante : Mettez le téléviseur en marche. 2. Appuyez sur la touch INPUT de la télécommande et sélectionnez la source de la télécommande et sélectionnez la source DVD. 3.
  • Seite 123: Réglages Généraux

    8. Lire un DVD 8.4. Réglages généraux Pour afficher les réglages du DVD, procédez de la manière suivante : Appuyez sur la touche D.SET de la télécommande. > Le menu Reglage General s’affiche. - - R e g la g e Ge n e r a l -- Affi ch e r T V Wi d e O SD L a n g...
  • Seite 124: Réglages Utilisateur

    8. Lire un DVD 2. Dans le menu Reglage General, appuyez sur la touche à flèche de la télécommande (à droite) et sélectionnez le symbole haut parleur. > Le menu Config Audio s‘affiche. - - C o n fig Au d io -- D o w n mix ST R Trouvez les descriptions détaillées sans le chapitre „3.5.
  • Seite 125: Télécommande Du Dvd

    8. Lire un DVD Trouvez les descriptions détaillées sans le chapitre „3.5. Navigation dans les menus“ à la page 98. Fonction Explication  PAL Type de TV  Multi  NTSC Audio Réglage de la langue audio Sous-Titre Réglage de la langue des sous-titres Menu Disque Réglage de la langue du menu Parental...
  • Seite 126: Fonctions Spéciales

    9. Fonctions spéciales 9.1. Affichage de la liste des chaînes Pour afficher la liste des chaînes procédez de la manière suivante : Appuyez sur la touche CH.LIST de la télécommande ou appuyez sur la touche OK de la télécommande (uniquement si aucun menu n’est affiché). >...
  • Seite 127: Favoris

    9. Fonctions spéciales 2. Sélectionnez la chaîne souhaitée et appuyez sur OK. Pour modifier la liste des chaînes (effacer, déplacer, verrouiller, ajouter des chaînes à la liste des favoris), sélectionnez la NOTE fonction Modification de programme dans le menu Canal. Voir également menu programmes à...
  • Seite 128: Info Chaîne

    9. Fonctions spéciales 9.3. Info chaîne Pour afficher les informations relatives aux chaînes, procédez de la manière suivante : Appuyez sur la touche DISPLAY de la télécommande. > Des informations relatives à la chaîne s’affichent. 9.4. Langue des sous-titres Pour affichez la langue des sous-titres, procédez de la manière suivante : Appuyez sur la touche SUBTITLE de la télécommande.
  • Seite 129: Guide Des Programmes (Epg)

    9. Fonctions spéciales 9.5. Guide des programmes (EPG) Pour afficher le guide des programmes, procédez de la manière suivante : Appuyez sur la touche EPG de la télécommande. > Le menu Guide des Programmes s’affiche. GUIDE DES PROGRAMMES 05:30 - 09:00 28 Jun 2016 Informations/Affairs cour...
  • Seite 130: Téletexte

    9. Fonctions spéciales 9.7. Téletexte Le télétexte est mis à disposition comme service gratuit par la plupart des chaînes TV. Il propose différentes informations, comme par ex. News Ticker et actualités, prévisions météo, informations dans le domaine de l’économie, du sport, de la culture, des conseils, ainsi que des informations concernant le programme TV.
  • Seite 131: Recherche Des Dysfonctionnements

    10. Recherche des dysfonctionnements Problème Action S’assurer que le câble du secteur a été branché correctement. S’assurer que l’interrupteur marche/arrêt à l’inférieure de l’appareil est L’appareil ne s’allume pas bien activé. S’assurer que la polarité de l’alimentation électrique est correcte. S’assurer que la source correspondante (INPUT) est sélectionnée.
  • Seite 132: Spécification

    11. Spécification LED TV CAV246DSW (No. de référence CAV246DSW) Données techniques Résolution (in Pixel) 1920 x 1080 (Full HD) Format de l‘image 16:9 Rapport du contraste 3.000:1 Luminosité 250 cd/m Angle de visualisation (D/G/H/B) 89°/89°/89°/89° Haut-parleurs 2 x 3 Watt (Stereo) Tuner TV analogique Tuner DVB-T2 HD (H.265)
  • Seite 133 CAV246DSW_Anleitung - Update 20170102.indd 133 10.01.2017 11:16:09...
  • Seite 134 CAV246DSW_Anleitung - Update 20170102.indd 134 10.01.2017 11:16:09...
  • Seite 135 CAV246DSW_Anleitung - Update 20170102.indd 135 10.01.2017 11:16:09...
  • Seite 136 Facebook “f” Logo C MYK / .ai www.facebook.de/caratecgmbh Caratec GmbH Buschurweg 4 D-76870 Kandel +49 7275 913240 +49 7275 913274 www.caratec.de CAV246DSW_Anleitung - Update 20170102.indd 136 10.01.2017 11:16:10...

Inhaltsverzeichnis