Herunterladen Diese Seite drucken

Safety; Overheating Protection; Safety Instructions - Atag FR3171M Anleitung

Einbau-fritteuse

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

SAFETY

Overheating protection

Safety instructions

GB6
In the event of a problem, the power supply is immediately cut off. The
power supply is not automatically resumed. Contact the service depart-
ment to have the safety component repaired.
This appliance has been designed for household use exclusively. In order
to avoid any damage, it is important that you follow the instructions
in the user manual. If this appliance is used for any other purpose, the
guarantee will expire. Following is an overview of a number of important
safety instructions. Read them care fully.
WARNING: The appliance and its accessible parts become hot during
use. Care should be taken to avoid touching heating elements.
Children less than 8 years of age shall be kept away unless continuously
supervised.
This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved.
If the safety instructions and warnings are not heeded, the
manufacturer can not be held liable for any consequential
damage.
- Service and maintenance may only be carried out by an ATAG
authorized service organization.
- Only parts may be used that have been supplied by ATAG. Read the
guarantee.
- Make sure that the cable does not jam.
- Never leave the appliance unattended when in use.
- In the event of the oil or fat catching fire, place the lid on the
appliance to extinguish the flame.
- Switch off the appliance if the oil or fat catches fire. Also switch off the
extractor hood. If you cannot do so with the switch on the appliance,
switch off the fuse in the meter cabinet instead.
- Check if you have switched off the appliance if you have finished
using it. The button should indicate zero.
important matters

Werbung

loading