Troubleshooting; Responsible Disposal - Cotech 922206-B Bedienungsanleitung

Troubleshooting

Problem
The floodlight is not activated
by movement within
the detection zone.
The floodlight comes on for
no reason.
The floodlight does not
turn off.
The floodlight comes on
during the day.
When the [ LUX ] setting is set
to , the detection distance
is shortened.
Cleaning
Wipe the PIR sensor's diffuser with a damp cloth a few times a year. Never remove the PIR
sensor housing. This may cause damage and invalidate the guarantee.

Responsible disposal

This symbol indicates that this product should not be disposed of with general
household waste. This applies throughout the entire EU. In order to prevent any
harm to the environment or health hazards caused by incorrect waste disposal,
the product must be handed in for recycling so that the material can be disposed
of in a responsible manner. When recycling your product, take it to your local
collection facility or contact the place of purchase. They will ensure that the product
is disposed of in an environmentally sound manner.
Possible cause
No mains voltage, blown fuse,
switch set to off.
The environment is too bright.
Incorrect positioning.
Heat sources, other lighting or
car headlights are activating
the sensor.
Wild animals/birds, pets
activating the sensor.
Reflections from a swimming
pool or other reflecting surface.
Continuous false triggering.
The [ TIME ] setting is incorrect.
The [ LUX ] knob is set to full
daylight activation .
Interference from sunlight.
7
Correction
Check the connections,
fuses, switch.
Redirect the sensor, or move
the sensor itself.
Redirect the sensor.
Redirect the sensor away
from interfering light sources.
Redirect the sensor.
Redirect the sensor.
Redirect the sensor.
Reduce the time setting.
Adjust the [ LUX ] knob.
Re-test at night.