Camera Adjustment; Installing The Camera - Rusta 308015570101 Gebrauchsanweisung

ENG

CAMERA ADJUSTMENT

The camera records in one direction. To record the view in front of the vehicle. face the
camera aimed in the direction through the front windshield.
Optional: To record the view inside of the vehicle, face the camera looking out the rear
window. Adjust camera as needed to avoid direct sun glare. Recorded DVR video footage
is adversely affected by the harsh (direct) sunlight.
Important note: The HD DVR is not intended for use as a surveillance, security or time-
lapse camera system

INSTALLING THE CAMERA

1. Insert a memory card: Please insert the mem-
ory card correctly according to the instructing
directions of the slot, press the card until a
click is heard. Since the recording speed is
high, the card must be high-speed card (CLASS
10 or above). Note: For new card, please format
the card with the machine.
2. To remove the memory card: Press the mem-
ory card, pop up the slot. Note: Please don't
remove or insert a memory card in boot state,
to avoid damaging the memory card.
3. Mount the camera on the windshield in front of
the car rearview mirror.
4. Connect to the power supply. Only use the original
factory standard charger. Connect one end of the car
charger with the USB port, connect another end to car
power socket. The camera will start to work, when
the car engine is turned on. Note: Place the wiring
along the windshield edge, as shown above so it does
not obstruct the drivers view.
5. On / Off
(1) Auto On/Off: Once the car engine turns on, the
device and recording will start automatically. Once
the car is turned off, the device will save the video
automatically and power off within 10 seconds.
(2) Manual On/Off: press the power key 3s , the device
will turn ON or OFF.
8
POWER
SOCKET