Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
AIR 9000 CON
Seasonal cleaning
At the end of the hot season or if it is intended to not use the appliance for a prolonged
period of time, work as follows:
•
Turn the appliance off and disconnect the plug from the socket.
•
Place the appliance near a water unloading point or position a container in the rear
part of the appliance.
•
Remove the cover (11)
•
Remove the cap (10); water immediately leaks from the joint.
If desired, connect a small hose (not supplied) to the unloading joint to better
direct water.
☞
Do not perform this operation on wooden floors, on carpets
or wall-to-wall carpeting.
Make sure that leaking water doesn't enter in contact with
delicate objects, with cables or power sockets.
•
Slightly tilt the appliance on one side to allow all water to flow out.
•
Correctly reposition the cap (10) and the cover (11).
•
Insert the plug in the socket.
•
Start the appliance in "Ventilation" (FAN) mode.
Let the appliance work for 3÷6 hours so that the appliance inside dries.
This procedure prevents the formation of mould inside the appliance during stor-
age.
•
Clean, dry and correctly reposition the filters.
•
Remove the closure support from the window.
•
Remove the flexible hose and the adapter from the appliance.
•
Store everything in a dry place protecting the appliance with a plastic enclosure if
possible.
CLEANING
EN
101
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
