Herunterladen Inhalt Inhalt Diese Seite drucken

Operation; Cleaning And Maintenance; Technical Specifications - Omnitronic UHF-200 Bedienungsanleitung

Pocket transmitter
Vorschau ausblenden Andere Handbücher für UHF-200:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

6. OPERATION

1
Set the sliding switch to "ON" to switch on the transmitter. The battery indicator shortly lights up.
After switching on the transmitter, a radio connection to the receiver is set up. The reception indicator
RF on the receiver indicates that a connection exists to the transmitter.
2
Speak into the microphone. The volume level can be adjusted by
changing the sensitivity with the gain control in the battery compartment.
Use a small screwdriver to turn the selector switch to another position.
Reduce the sensitivity if the volume of the transmitter signal is too high
and thus distorted. Increase the sensitivity if the volume is too low and a
poor S/N ratio results.
The AF indicator on the receiver lights up when an audio signal from the
microphone is received.
3
To mute the transmitter during operation, set the sliding switch to "MUTE". Then no sound will be
transmitted.
4
To switch off the transmitter, set the sliding switch to "OFF".

7. CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device except for the batteries. Maintenance and service
operations are only to be carried out by authorized dealers.
Should you need any spare parts, please use genuine parts. Should you have further questions, please
contact your dealer.

8. TECHNICAL SPECIFICATIONS

Item
13063217 UHF-200
13063218 UHF-200
13063219 UHF-200
13063220 UHF-200
Coverage:
RF power output:
Modulation method:
Frequency response:
S/N ratio:
Selectivity:
T.H.D.:
Connection:
Battery::
Battery life
Dimensions:
Weight:
Please note: Every information is subject to change without prior notice. 12.06.2014 ©
Carrier frequency
Color code
863.010 MHz
Red
863.420 MHz
Yellow
864.300 MHz
Green
864.990 MHz
blue
50 m (with line-of-sight)
10 mW
F3F
40 Hz - 18 KHz
>105 dB
>80 dB
<0.5 % at 1 kHz
3-pin mini XLR
2 x 1.5 V battery, type AA
approx. 10 hours
200 x 650 x 25 mm
75 g
12/12
00074631.DOC, Version 1.1

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis