Important Safety Precautions - MAC Audio BT FORCE 116 Bedienungsanleitung

Dear customer,
Thank you for choosing the Mac Audio BT Force 116 / BT Force 210.
Please read the following information carefully before starting to use the BT Force.

IMPORTANT SAFETY PRECAUTIONS

Please read through the instruction manual carefully before starting to use the device. This manual
contains important information concerning operation and safety aspects. It is imperative you
observe all of the information. Keep the manual in a safe location.
•
WARNING NOTICES: All of the warning symbols on the device, accessories and in the instruction manual
itself must be adhered to.
•
EXPOSURE TO HEAT: Only operate the device and accessories in a temperature range from 10°C to 40°C.
•
The device should not be positioned near heat sources (heaters, ovens, radiant heaters, naked flames,
etc.). When setting up close to an amplifier a minimum distance of 10 cm must be maintained.
•
No naked flame sources, such as lighted candles, should be placed on the apparatus.
•
Pay attention to a sufficient ventilation of the device. The device may not be covered, e.g. by drapes,
curtains. Maintain a distance of 10 cm to walls.
•
EFFECT OF MOISTURE: The device should not be exposed to dripping or splash water. Neither should
they be used to support vases or other containers filled with liquid. Do not expose the device to water
or high levels of humidity. There is a danger of electric shock. In the event of contact with moisture or
liquids remove the mains adapter immediately.
•
CLEANING: Please use a soft, dry cloth with no cleaning agents, sprays or chemical solvents, as these
could damage the surfaces.
•
ELECTRICAL CONNECTION: Please note the voltage levels on the information signs. The mains adapter
for the device should only be operated with the voltage and frequency values specified on the signs.
•
LIGHTNING PROTECTION/PREVENTIVE MEASURES: If the device is not going to be used for a prolonged
period (e.g. when on holiday), it should be disconnected from the mains by removing the plug. The
device should also be disconnected from the mains in the event of a thunderstorm. Doing this will
prevent damage caused by lightning and overvoltage.
•
MAINS CABLE: The mains plug of the power adapter must always be suitable for operation. The power
adapter should only ever be laid out in a manner that prevents the power cord of the power adapter
from being trodden on. It should not be pinched by objects either, as this can damage the cable.
•
The power adapter is used as the disconnecting device. Disconnecting devices shall remain readily
operable.
•
OVERLOAD: Sockets, power strips and extension cables should not be overloaded. If an overload occurs,
there is a risk of electric shock and fire.
•
The device should only be positioned or mounted on a solid surface and not on moving base frames,
otherwise there is a risk of injury.
•
Only use attachments/accessories specified by the manufacturer.
•
Use only the following power supply adapter: "Cullpower, model SAW30-10-2000G" (BT Force 116) /
"Cullpower, model SAW38-120-4000G" (BT Force 210)
•
Batteries (battery pack or batteries installed) shall not be exposed to excessive heat, such as sunshine,
fire and the like.
Do not open! Risk of electric shock!
CAUTION: In order to avoid electric shock do not open the speaker
housing/mains adapters or remove the covers. The user is not to conduct
any repairs him/herself. Repairs should only be conducted by qualified
technicians! Do not use any sockets or extension cables that do not fully
accommodate the plug of the device.
9