Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5. Tonearm lift
6. Tonearm rest
7. Tonearm height adjusting scale
8. Precise weight
9.
Cartirdge installation
Note: There is no cartridge matched with Topson TT, audiophiles can use the
cartridge as own favorite; All cartridges with half inch mounting holes, but within
Topson arm loading pressure range can be fitted.
1. Leaving the needle's protection cover on, fit the cartridge
to the headshell using the screws supplied with the cartridge
by passing one screw through each slot in the headshell (1).
Do not tighten the nuts yet.
2. Connect the tonearm wires to the cartridge pins as follows:
White
Red
Green
Blue
3. The full sound quality of the record player can only be achieved of the cartridge is
correctly adjusted. The strobe disc (back side) can help for it. If you are not well
acquainted with the adjustment of cartridges you are advised to call upon the
willing help of your Topson TT dealer to accomplish this task for you.
Please note: adjusting a cartridge and tonearm calls for the greatest care in
order to avoid damaging the cartridge or tonearm bearing. Leave this work to your
dealer if you are in any way unsure of the necessary steps and precautions to be
taken.
Technical specifications Topson tonearm
Tonearm model No.
Main counterweight
Adjustable height scale
Effective tonearm length
Mounting distance
Overhang
Arm weight
Tonearm inner cable
Connector
R7 standard accessories:
Strobe disc: 1 pc
2.0 & 2.5 Allen hex: 1 for each
2.6X16 Allen hex screws: 3 pcs
3X20 Allen hex screws: 4 pcs
left channel positive (L+)
right channel pos. (R+)
right channel return (R-)
left channel return (L-)
T2
68g
6 mm
9' (232mm)
214 mm
17.88 mm
416 g
Cadas cables
Topson male & female connector
Werbung
