SOLIS Blender PRO 839 Gebrauchsanleitung Seite 48

The bottom of the mixing jug Immediately switch to "0" (middle switch position; OFF) and unplug
becomes loose in operation, the power cord. Immediately empty the mixing jug. Clean and dry
liquid leaks out.
You cannot seal the
bottom of the jug;
Liquid leaks from the
bottom of the mixing jug.
The bottom of the jug
cannot be unscrewed.
Disposal instructions
Worn out appliances must be made unserviceable. Unplug the power cord from the socket and cut off the
power cord from the appliance. Electrical appliances must not be disposed of with the household rubbish. They
must be disposed of in an environmentally friendly way. Take the appliance to an official disposal point or to an
authorized dealer. All the disposal points with the "Disposal Guaranteed" label work with the Swiss Disposal
Foundation (Stiftung Entsorgung Schweiz; S.EN.S), which guarantees the environmentally friendly disposal of old
appliances.
46
the blender base (page 44). If liquid has entered the air openings in
the bottom of the blender base, then have the appliance checked in an
authorized workshop. Check that the mixing jug is correctly and completely
assembled in accordance with the instructions on page 36.
TIP: Check the seal of the mixing jug by adding some water before adding the
ingredients. If necessary tighten the bottom of the jug more firmly. Do not
overtighten the thread at the bottom of the jug.
If the bottom of the jug is still leaky, follow the instructions in the next point.
Immediately empty the mixing jug. Disassemble the mixing jug
(page 42) and check the components for food remains or
damage (scratches, cracks, or deformations). If necessary, clean
the components (page 42.)
Replace damaged components with original spare parts from the manufacturer.
Assemble the mixing jug in accordance with the instructions on page 36.
CAUTION: Never operate the appliance with unsuitable or damaged parts. Only
use parts that are intended and approved for the purpose by the manufacturer.
Please contact your dealer.
Note that to unscrew the glass jug, it must be turned anticlockwise.
Place your hand through the jug handle so that the handle is against the back of
your hand. Grasp the bottom of the jug with your other hand and then turn the
glass jug.
If necessary, get someone else to hold the bottom of the jug and then hold the
glass jug with both hands.
TIP: The bottom of the jug can be more easily tightened and loosened if you
smear the gasket with a drop of cooking oil before assembly.