ZENEC ZE-NC620D Bedienungsanleitung Seite 29

SYSTEM SETUP: IMPORT/EXPORT SYSTEM SETTINGS SYSTEM SETUP: IMPORT/EXPORT SYSTEM SETTINGS
Go to Setup>Misc>Help
Export system settings:
Import system settings:
NOTE:
Make sure the USB flash drive has been FAT32 formatted.
Refrain from manually modifying the generated export file. Re-import
relies on proper file integrity.
After adding new functions, by means of a system update, they will
always be intialised with standard default values. That compensates for
lacking values from the import file content.
After a firmware update, check the update installation instructions for
notes on system settings import and take them into consideration.
1. Format USB flash drive with FAT32.
2. Connect USB flash drive to device.
3. Tap "OK", at System Settings-Export
option, to launch file export.
1. Connect USB flash drive to device.
2. Tap "OK", at System Settings-Import
option, to launch import.
3. Restart device upon import completion.
29