Installation; Power Supply; Network Connection - Imperial DABMAN i200 CD Bedienungsanleitung

6. INSTALLATION

Please remove the parts carefully from the packaging. Check whe-
ther all parts are present.
Note: the radio can be controlled both by the keys on the radio as
well as via the remote control. The operation via the remote control
E
is more convenient and easy method of playing the DABMAN i200
CD. For this reason, this operating manual will focus of setting up
and operating the radio via the remote control supplied.
If the radio is connected to a network, it can also be controlled via
the application AirMusicControl App. This application is
available for Android and IOS operating systems. For more details
see Chapter 8.

6.1. Power supply

First, connect the mains adapter supplied with the corresponding
socket on the rear panel of the DABMAN i200 CD. Now connect
the mains adapter to a 220V outlet. Then extend the telescopic
antenna on the rear panel of the radio to its full extent, this will en-
sure the best possible reception, if you wish to receive terrestrially
broadcast stations via the antenna.

6.2. Network connection

To use the Internet functions of the radio, it must be connected to
a network. You can establish the connection via a cable (LAN) or
via the integrated W-LAN receiver. If you are using a LAN cable,
connect this with the LAN socket (Point 12, page 11)
Operating Manual 60