Sony Bravia KDL-V26A11E Bedienungsanleitung Seite 19

To
Set a programme to be displayed
automatically on the screen when it starts
– Reminder
Set the time and date of a programme you
want to record – Manual timer REC
Cancel a recording/reminder – Timer list
Do this
1
Press M/m/</, to select the future programme you want to
display.
2
Press OK.
3
Press M/m to select "Reminder".
4
Press OK to automatically display the selected programme
when the programme starts.
A c symbol appears by that programme's information.
The indicator on the TV (front) lights up in standby mode.
Note
If you switch the TV to standby mode, it will automatically turn itself on
when the programme is about to start.
1
Press OK.
2
Press M/m to select "Manual timer REC".
3
Press M/m to select the date, then press ,.
4
Set the start and stop time in the same way as in step 3.
5
Press M/m to select the channel, then press OK to set the TV
and your VCR timers.
A symbol appears by that programme's information.
The indicator on the TV (front) lights up in standby mode.
Notes
• You can set VCR timer recording on the TV only for Smartlink compatible
VCRs. If your VCR is not Smartlink compatible, a message will be displayed to
remind you to set your VCR timer.
• Once a recording has begun, you can switch the TV to standby mode, but do not
switch off the TV completely or the recording may be cancelled.
• If an age restriction for programmes has been selected, a message asking for pin
code will appear on the screen. For more details refer to "Parental Lock" on
page 37.
1
Press OK.
2
Press M/m to select "Timer list".
3
Press M/m to select the programme you want to cancel, then
press OK.
A display appears to confirm that you want to cancel the programme.
4
Press , to select "Yes", then press OK to confirm.
19
GB