Digital Output - Clatronic CTV 758 Bedienungsanleitung

05_CTV758_GB 57
4:3 Letterbox: You will see the complete width of the fi lm. The fi lm is thus
reduced in size, whereby black bars appear below and above the fi lm.
16:9 Wide: Select this option if you use a wide screen TV for replay. Please
note that fi lms, that have been recorded with TV-aspect 4:3 can still be
replayed using aspect 4:3. This means, that replaying this fi lm will not require
the complete wide screen area of the television.
Wide Squeeze: Select this option if you use a wide screen TV for replay.
This setting is used to adapt fi lms in 4:3 format to the aspect ratio of the
widescreen television set. (Preferred setting for the built-in screen.)
NOTE: The setting „4:3 Panscan" is not supported by all DVDs.
Angle Mark (Camera Angle)
If the DVD contains sequences recorded from different camera angles you can
use the ANGLE/TTX button (Fig. 2/4) to select the various camera angles. This
function is only available if the DVD contains scenes with various camera angles.
Before you can use this function it has to be activated.
On: The angle symbol is shown on the screen.
Off: No angle symbol is shown on the screen.
OSD Language
Here you can select the language of the on-screen displays.

Digital Output

Here you specify the settings for the digital Audio output.
SPDIF/Off: Output of an analogue Audio signal, but no digital signal.
SPDIF/RAW: Output of a digital Audio signal. Use this setting if your amplifi er
is no two-channel stereo amplifi er.
SPDIF/PCM: Output of a digital Audio signal that is converted to a 2-channel
signal. Use this setting if your amplifi er is a two-channel stereo amplifi er.
NOTE:
If there is no Audio output, even though you connected the DVD-Player to an
amplifi er, you will most likely have chosen an incorrect setting for the Audio
output.
57
15.06.2007, 10:11:11 Uhr