Changing The Default Settings - Clatronic CTV 758 Bedienungsanleitung

05_CTV758_GB 55
Start the replay of photos by selecting the fi le from which the replay shall start ➯
Page 54, „Selecting fi le/directory and starting replay".
NOTE:
After a few seconds a preview picture appears on the right-hand side in the
two-column menu window.
Scrolling
Manual: Press the I (Fig. 2/25) or
control to scroll forward or back.
Automatic: Press the ENTER-button (Fig. 2/7). The pictures change auto-
matically.
Rotating a photo
You can use the Cursor buttons to rotate a photo during replay:
Rotate clockwise for 90°: Cursor Button „ "
Rotate counter-clockwise for 90°: Cursor Button „ "

Changing the default settings

A large number of default settings can be comfortably changed via the screen
menu.
Press the SETUP-button (Fig. 2/9) on the remote control to start the menu for
changing the default settings.
NOTE:
Many of these default settings can be changed via both the remote control and
the menu. The difference is: If you change the default settings via the remote
control, these changes will only be valid until the DVD-Player is switched off or
the DVD is changed.
However, any changes made in the menu are permanent.
I-button (Fig. 2/26) on the remote
15.06.2007, 10:11:08 Uhr
55