Building-In - Zanussi ZOU 333 Bedienungsanleitung

Electrolux

Building-in

To ensure correct operation of the built-in assembly,
the kitchen cabinet and the recess for the built-in
appliance must have suitable dimensions. When the
appliance is fitted-in, there must be no open spaces
left and it must be closed on all sides by the kitchen
furniture to prevent the possibility of inadvertently
touching "live" (current carrying) parts of the oven.
All parts ensuring such a protection, including any
covering panel (for instance, if the appliance is
installed at the end or at the beginning of a kitchen
counter) must be fastened in such a way as to
prevent removal of the same without the aid of some
tool. This appliance can be placed with its back and
with one side close to appliances or walls of higher
height. The other side, instead, must be placed close
to furniture or appliances, having the same height.
Overall oven dimensions (Fig. 7)
Building-in under a kitchen counter
The recess must have the dimensions shown in
Fig. 8. Before carrying out the building-in of the
oven, connect it to the hob (see corresponding
chapter); then recess completely the oven under
the counter; open the oven door and secure the
oven to the kitchen cabinet .
Securing the oven to the cabinet (Fig. 9).
- Fit the appliance into the cabinet recess.
- Open the oven door and secure the oven to
the kitchen cabinet by placing the four distance
holders (A) in the holes provided in the oven
frame and then inserting the four wood screws
(B)
48
Fig. 9
Fig. 7
Fig. 8