Sound Settings - MAC Audio MMC 220 Bedienungsanleitung

Station presets
A total of 30 FM stations can be stored in the memory.
• Select the desired station (FM). Open the memory using the PROGRAM button on the remote
control (8).
• Choose the desired station number.
• The station number flashes in the display.
• Press the PROGRAM button again to store the station.
• The station number stops flashing.
• Repeat this procedure to store other stations.
RDS (RADIO DATA SYSTEM) FUNCTIONS OF THE TUNER
RDS is a system which provides information about FM stations that is broadcast together with the
station's signal. The MMC 220 can present this information (about the station, broadcast, etc.) in
the display. The RDS functions can be set via the RDS button on the remote control (14).
• PS (Program Service Name): Displays the name of the programme.
• PTY (Program Type Identification): Displays the type of programme.
• RT (Radio Text): Displays all information for the programme.
• CT (Clock Time): Displays the clock time.
If one of these functions is not supported despite reception of an RDS signal, "NONE" will appear
in the display.

SOUND SETTINGS

Setting the volume
The volume can be adjusted by using the VOLUME regulator on the front panel (5) or the
VOLUME+/VOLUME- buttons on the remote control (18, 19). VOL and a value between 00 and
MAX (32) then appears in the display.
EQ function
Various equaliser settings can be called up by pressing the EQ button on the remote control (20).
The following settings can be selected: FLAT, JAZZ, CLASSIC, ROCK, POP. These can be selected by
repeatedly pressing the EQ button.
25