Bios Settings; Pxe Boot - Genua genubox Kurzanleitung

Press the „F12" key during memory testing to enter the BIOS.
In the BIOS:
Enter "3" to see the Setup Options.
•
Leave the BIOS by either entering "Shift + E" (Save and Leave) or
•
"Shift + Q" (Discard and Leave). The BIOS also displays which
options are available and with what keys they can be accessed. The
capitalization for these entries matters, "e" does not equal "E".
When administrating an appliance via genucenter, you need to activate

PXE boot:

1.Boot into BIOS by pressing the key "F12" during the boot process.
2. Choose option "3" - Payload [setup] in the BIOS Menu, by
pressing key "3".
3. Toggle PXE Boot by pressing Shift + N.
4. PXE Boot is active when you can see the line "N Network/PXE
boot - Currently Enabled".
If instead of "Currently Enabled" the line says "Currently Disabled",
please repeat this step.
5. PXE Boot is now activated.
3.
14