Methods Of Access And Con Figuration - Genua genubox Kurzanleitung

Note: A label with two barcodes and hardware information is attached to
the chassis. One barcode contains the MAC address, the other the genua
machine ID.
Three access methods to the hardware are available:
Attach the XSo hardware with the supplied null modem cable to a
•
serial interface on your computer.
Start a serial terminal program (Windows: e.g., PuTTY or
•
SecureCRT. Unix: e.g., tip, cu, minicom or kermit).
Use these default connection settings:
•
115200 Baud
•
8 bit
•
No parity (None)
•
1 stop bit
•
Hardware Flow Control
•
For further information regarding the installation, please use the
•
manualson our website:
https://www.genua.de/en/support/downloads/manuals.html
13