3. Installation and starting.
1.1. Place the machine on a level and watertight
surface.
1.2. Connect to the Cold water supply using the hose
provided. The most appropriate connection is to
a tap that can be turned off.
The pressure shall be 14.5 – 72.5 PSI
(1 – 5 bar) for the automat to function
properly
Refer to Programming on page 9 when filling
the water manually.
1.3. Insert the power plug in a separately-earthed wall
socket. 230 V, 10 A.
1.4. Switch on using the switch that is located at the
back of the machine.
Check that the light comes on.
4.