Herunterladen Diese Seite drucken

POINT tec Automatik 9015 Bedienungsanleitung Seite 5

Werbung

DE
AUTOMATIK Kal. 8205, Kal. 8217
Datumseinstellung: Krone bis zum 1. Einrast-
Wochentag
punkt herausziehen und durch Drehen der
N
I II
Krone gegen den Uhrzeigersinn das Datum
einstellen, dann die Krone wieder in Nullstel-
lung [ N ] drücken.
Zeit
Zeiteinstellung: Krone auf Position 2 heraus-
ziehen und durch der Krone Drehen gegen
Datum
den Uhrzeigersinn die Zeit einstellen, dann
die Krone wieder in Nullstellung [ N ] drücken.
Einstellen des Wochentags: Krone bis zum 1.
N
I II
Einrastpunkt herausziehen und durch Drehen
im Uhrzeigersinn das Wochentag einstellen,
dann die Krone wieder in Nullstellung [ N ]
Zeit
drücken.
24-Std. Anzeige: Zeigt die Uhrzeit in 24-Std. an.
Datum
EN
AUTOMATIC Cal. 8205, Cal. 8217
Day indicator
N
I II
Time
Date indicator
N
I II
Time
Date indicator
Time adjustment: Pull out the crown at
position 2 and adjust the time by turning
it counter-clockwise, then push the crown
back into its neutral position [ N ].
Date adjustment: Pull out the crown till
position 1 and adjust the date by turning
it counter-clockwise, then push the crown
back into its neutral position [ N ].
Weekday adjustment: Adjust the day by
rotating the crown clockwise in 1 position.
24- Hour display: shows time in 24 hour
steps.

Werbung

loading

Diese Anleitung auch für:

Automatik 82s5Automatik 821aAutomatik 8205Automatik 8217