Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Trouble Shooting
No Function:
-
Check power supply
-
Check if the water purifier is installed properly
-
Water level is below minimum
-
Filter core is clogged
Reduced Misting Capability
-
Water level is too low
-
Filter core is expired
-
Water quality too low, use purified water instead
-
Water purifier or filter core is not installed properly
Continued use of an expired water purifier may reduce the misting capability. In this case remove the water container, open
the nozzle cover and drop purified water on the misting device by means of the provided suction tube. When completely
misted, repeat 3-4 times.
When the filter core has been in dry condition for prolonged periods of time, repeatedly press the top of the filter core to
increase it's suction capability.
Notes
You may record the date for the next change of the water purifier on the back label with a pencil.
When using the humidifier for the first time, the water container should be filled to the „MAX" level to support the suction
capability of the water purifier.
Do not direct the blow nozzle to windows, as it will fog the glass.
Do not blow mist on electronic devices to prevent damage.
It is highly recommended to use purified water exclusively to extend the service life of filter cores and the misting device.
Use a dry or slightly damped cloth to clean the machine, do not use alcohol, benzene or other solvents.
When not using the humidifier, remove the water from the water container.
Prolonged usage without sufficient water supply may reduce the service life of the humidifier.
Technical Data
Mains Power Supply:
12V Power Supply:
Dimension approx.
Water Container Volume: 140ml
Weight approx.
Safety Shut-off approx.
Operating Temperature:
Design and technical details subject to technical alteration.
This product has been manufactured adhering the European directives regarding electromagnetic compatibility standards
according applicable laws.
Technical details subject to change without prior notice. No liability assumed for typographical errors. 03/2004
230V~ 50Hz 45mA
12V DC 3W max.
76 x 79 x 127mm
205g
3h
0°C – 45C
Conrad Electronic GmbH, Klaus-Conrad-Str. 1, D-92240 Hirschau
www.conrad.de
www.conrad.com
Seite 6 von 9
Werbung
