weinor WeiTronic Combio-868 HD Montageanleitung Und Bedienungsanleitung Seite 50

WeiTronic programming instructions
Assigning additional remote control units (channels)
Allocation of a group (synchronous pairing)
1. Press the LEARN, UP, and
2. Press the UP button briefly
3. Press the DOWN button
New remote
control unit
(or channel)
1. Select the required group
2. Press the LEARN and DOWN
3. Press the UP button briefly
New remote
4. Press the DOWN button
control unit
(or channel)
50
DOWN buttons at the same
time for about 3 seconds.
The unit begin to move.
in the lower time window.
briefly in the upper time
window.
channel (e. g. channel 6) of a
paired remote control unit.
buttons at the same time for
about 3 seconds. The units
begins to move together.
in the lower time window.
briefly in the upper time
window.
Already
paired
remote con-
trol units
Already
paired
remote con-
trol units