Herunterladen Inhalt Inhalt Diese Seite drucken

Packaging List; Technical Data; Safety Precautions - Peqlab HX-1 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Instruction Manual HX-1 & HX-2

1. PACKAGING LIST

Digital Block Heater HX-1 respectively HX-2
1 Power cord
1 Block lifter
1 Instruction manual
After receipt of the equipment
However, immediately upon arrival, please check carefully that the shipment is complete and has not
been damaged in transit. For missing parts or to report any kind of damage, please contact PEQLAB
(see 'TECHNICAL SUPPORT AND ORDERING INFORMATIONS'). Please retain all packaging materials
until the delivery has been completely checked since this will speed up the return of goods if required
and reduce environmental impact. Any form of returns, replacements or credit notes must be agreed in
advance by PEQLAB. The warranty does not cover transport damages.

2. TECHNICAL DATA

Digital Block Heater HX-1 respectively HX-2
Block capacity: HX-1: 1 block, HX-2: 2 blocks
Temperature range: Ambient + 5 °C up to 150 °C
Temperature resolution: 0.1 °C
Temperature homogeneity: ± 0.2 °C (at 37 °C)
Temperature accuracy: ± 0.3 °C
Microprocessor controller
Display: Digital
Casing construction: High-grade steel
Block construction: Aluminium
RS232 Interface
Dimensions/weight: 20 x 26.5 x 8.3 cm (W x H x D)/2.2 kg
Power supply:
HX-1: 230 V
HX-2: 230 V

3. SAFETY PRECAUTIONS

-
Do not use this product in a humid or wet environment.
-
Do not use the unit in combustible or flammable atmosphere.
-
The rated voltage indicated on the unit (V = volt) must correspond with the mains voltage of the
power source.
-
Connect unit only to a properly grounded outlet.
-
Do not touch block when hot or when unit is heating. Use block lifter.
-
Avoid liquids on the surface of the unit and in the environment of the block.
Caution: Touching the hot surface of the block can cause injury.
Use of this product in any manner not specified by the manufacturer or modification of the product may
cause injury and/or may void the warranty.
PEQLAB_v0312_E
230 V, 50/60 Hz, 0.4 A, fuse 1.5 A
230 V, 50/60 Hz, 0.6 A, fuse 2.2 A
6
Please note that the blocks of Block Heater HX-1
and HX-2 are not included in shipment and have to
be ordered separately!

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Hx-2

Inhaltsverzeichnis