Charging The Battery - Bertronic Everest Bedienungsanleitung

4. The "brightness" can be used to change the brightness of the display.
We recommend to use the highest level, as the lower ones will look
rather dark outside and it could make trouble to set it back to normal.
5. The "Sleep timer" can be changed here as well. For more information
regarding the sleep timer, please read through the music section of
this manual.
6. Additional "Information" can be found respectively here.
7. The last option enables you to reset the player to its "factory
settings". This may turn the player to GERMAN! Open up
"EINSTELLUNGEN" on the main menu and choose the first option
"Language/Sprache" and choose English again.
Key Lock: To lock the usage of keys you can simply hold the M button. To
unlock them again, you do it the same way.
To make sure all settings are saved appropriately please turn OFF the player
afterwards by pressing and holding the "PLAY/PAUSE"-button. Turn the player
ON by doing the same again.

Charging the battery

The battery can be charged on two different ways:
1. By using an "USB adapter" with an electrical outlet.
2. By using the "USB cable" and connecting the player to a computer.
The fastest way is by using an appropriate "USB adapter" in combination with
an electrical outlet. Please be aware that an adapter which is too strong can
damage the battery!
The Player should be charged within 1-2 hours.
The battery information on the display will help you check up on the status
itself.
®
www.bertronic.de
www.ber-mond.de
Page
26