After Use; Care And Cleaning; Declaration Of Conformity (Doc); Technical Data - Renkforce Selfie Stick Pro Bedienungsanleitung

b) Making a link (pairing)
• Activate Bluetooth on your smartphone.
• Turn on the Selfie stick. After a short time, "TWNT-ST181" will appear in the list of available
Bluetooth devices on your device. Select "TWNT-ST181".
If you are prompted to enter a password, enter 0000.
• As soon as the connection is successful, the blue LED is solid.
With some mobile phones it may be necessary after the pairing process to confirm
the link between your mobile phone and the product.
This is normally necessary if you already have at least one other Bluetooth device
registered to the mobile phone or if the mobile phone is connected to another device
(such as a Bluetooth headset).
Only one Bluetooth device may be paired with the product at one time. Disconnect
any active Bluetooth links before pairing with another Bluetooth device.
The link will disconnect if the product or paired Bluetooth device is turned off
or removed from range. When the respective device is turned back on or when
the Bluetooth device comes back into range of the product, the connection is
automatically restored.
To enable this automatic reconnection, this function may need to be activated on
the Bluetooth device (please inform yourself on this point in the instructions for your
Bluetooth device).
c) Placing the smartphone in the holder
• Loosen the wing bolt.
Rotate the smartphone holder to the desired position.
Tighten the wing bolt again.
• Hold the handle firmly with one hand.
Extend the telescopic rod to the desired length.
• Place your smartphone in the holder.
Make sure your smartphone is sitting securely in the holder.
d) Shooting a photo
• Open the camera app on your smartphone.
• Activate camera mode.
• Press the shutter button to shoot a photo.
e) Video recording
• Open the camera app on your smartphone.
• Activate video mode.
• Press the shutter button to start recording a video.
• To stop recording, press the shutter button again.

After use

• Turn the product off.
• Remove your smartphone from the holder.
• Collapse the telescopic rod.
• Loosen the wing bolt.
• Rotate the smartphone holder back to its original position.
• Tighten the wing bolt again.
• The product is now ready for space-saving storage or transport.

Care and cleaning

• Before cleaning, unplug the cable from the product.
• Remove your smartphone from the holder before cleaning.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may
damage the casing or cause the product to malfunction.
• Do not immerse the product in water.
• Use a dry, lint-free cloth to clean the product.

Declaration of Conformity (DOC)

Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declares that this
product conforms to the 2014/53/EU directive.
Click on the following link to read the full text of the EU declaration of conformity:
www.conrad.com/downloads
Select a language by clicking on a flag symbol, and then enter the product order
number in the search box. The EU Declaration of Conformity is available for
download in PDF format.
Disposal
Electronic devices are recyclable waste and must not be placed in household waste.
Always dispose of the product according to the relevant statutory regulations.
You thus fulfill your statutory obligations and contribute to the protection of the
environment.

Technical data

System requirements .................... iOS, Android
Bluetooth version .......................... 4.0
Wireless frequency ....................... 2.4 GHz
Transmission power...................... max. 4 dBm
Range ........................................... 10 m
Rechargeable battery ................... LiPo, 55 mAh
Charging time ............................... approx. 30 minutes
Clamping area .............................. 55 – 90 mm
Load capacity ............................... max. 400 g
Operating conditions ..................... -10 to +50 °C, max. 85 % RH
Storage conditions ........................ -10 to +50 °C, max. 90 % RH
Telescopic rod length .................... max. 80 cm
Dimensions (W x H x D) ............... 45 x 185 x 35 mm (collapsed)
Weight .......................................... 136 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming, or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication represents the technical status at the time of printing.
Copyright 2017 by Conrad Electronic SE. *1574939_v1_0917_02_IPL_m_en