Operation - Renkforce Selfie Stick Pro Bedienungsanleitung

Operating instructions
Selfie stick Pro
Item no. 1574939
Intended use
The product is used as a remote shutter release for smartphone cameras. The control command
to release the camera shutter is transferred wirelessly via Bluetooth to your smartphone. Thanks
to the rotatable, flexible smartphone holder, the product is especially suitable for creating self-
portraits and group photos. Power is supplied to the product by a built-in rechargeable battery.
The rechargeable battery can be charged via USB.
The product is suitable only for use in dry environments. Contact with moisture (e.g. in
bathrooms) must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the
product for purposes other than those described above may damage the product. In addition,
improper use can cause hazards such as a short circuit, fire or electric shock. Read the
instructions carefully and store them in a safe place. Make this product available to third parties
only together with its operating instructions.
This product complies with statutory national and European regulations. All company and
product names are trademarks of their respective owners. All rights reserved.
Bluetooth is a registered trademark of Bluetooth SIG, Inc. worldwide.
®
Delivery content
• Selfie stick
• USB charging cable
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
on this page. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle indicates that there is a risk to your
health, e.g. due to an electric shock.
This symbol is used to highlight important information in these operating instructions.
Always read this information carefully.
This symbol indicates special information and advice on how to use the product.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we will assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General information
• This product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorized use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height
may damage the product.
• Always observe the safety and operating instructions of any other devices which
are connected to the product.
• Never pour any liquids over electrical devices or place objects filled with liquid
next to the product.
• Never use the product immediately after it has been brought from a cold room
into a warm one. The condensation generated may destroy the product. Allow the
product to reach room temperature before connecting it and putting it to use. This
may take several hours.
• Make sure that the cable is not pinched, kinked or damaged by sharp edges.
• Consult a technician if you are not sure how to use or connect the product.
• Maintenance, modifications and repairs must be done by a technician or an
authorized repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Rechargeable batteries
• The rechargeable battery is built into the product and cannot be replaced.
• Never damage the rechargeable battery. Damaging the casing of the rechargeable
battery may cause an explosion or fire! Unlike conventional batteries (e.g. AA or
AAA batteries), the casing of the LiPo rechargeable battery is made of a sensitive
plastic film.
• Never short-circuit the contacts of the rechargeable battery. Do not throw the
battery or the product into open flames. This may cause a fire or explosion!
• Charge the battery regularly, even when you are not using the product. You do not
need to discharge the rechargeable battery before recharging it.
• Never leave the battery unattended when it is charging.
• Place the product on a heat-resistant surface before charging the battery. The
product may become warm when the battery is charging.
Product overview
Charging the rechargeable battery
Please fully charge the rechargeable battery before initial operation.
When the battery is fully charged, the product has an operating time of approx.
20 hours. In standby mode, the fully charged battery lasts approx. 72 hours. Charge
the battery in time.
• Connect the Micro-USB plug of the included charging cable to the charging port on the
product.
• Connect the USB plug with a USB power source (e.g. PC or power supply with USB output).
The USB power supply must be able to supply a current of 500 mA.
• The red LED lights up during charging. When the rechargeable battery is fully charged, the
LED will turn off.
• Disconnect the cable from the product and from the power source.

Operation

a) Turning on and off
• Press and hold the shutter button for 3 seconds to turn on the product. The status LED
flashes blue.
• To turn off the product, press and hold the shutter button for 3 seconds. The blue status LED
flashes quickly three times and then goes out.
1
2
1 Wing bolt
3
2 Telescopic rod
4
3 Smartphone holder
4 Shutter button with built-in
status LED
5 Charging port
6 Eyelet for hand strap
7 Handle
5
6
7