Renkforce 1208452 Bedienungsanleitung Seite 6

j) Reset
It is possible to reset the radio controlled socket to its factory setting (Reset). In order
to do so, connect the radio controlled socket to the wall socket, push the button within
2 seconds and hold the button for another 30 seconds. During this time, the red LED
flashes rapidly.
After said 30 seconds, the reset which sets back the security code to "1234" is ex-
ecuted. In addition to that, a reset erases the pairing list, i.e. all smartphones that have
previously been paired with the device. This procedure also erases all authorisations,
which means that you will have to pair your smartphone afterwards. All switching
functions will also be erased by the reset.
Given the fact that the radio controlled socket may only be paired with a limited
number of smartphones, it is possible that after a while, no new smartphone can be
paired anymore. The reset is intended to solve this problem as well.
A reset should also be executed before the radio controlled socket is passed on to
another person.
k) Users
You can access the radio controlled socket with a maximum number of five smart-
phones at a time. With the sixth user, every further user will be rejected automatically.
Due to the different Bluetooth modules of the smartphones and to additional
interfering signals in the room, there may be problems when several users
try to access the device.
Getting started
Do not connect the radio controlled socket to the wall socket
at the beginning. First, download the intended app for your
device onto your smartphone. It is available in the Google
Play Store for download under "renkforce - My Home", free
of charge.
Install the app on your Android smartphone.
Start the app by tapping on the respective logo on your smartphone. At first, the user
will be asked to activate Bluetooth if it is not activated yet. When starting the app for
the first time, the user will be guided through a tutorial, which shows the first steps
for the safe handling of the radio controlled socket. Please read the tutorial carefully.
Afterwards, the radio controlled socket has to be connected to a wall socket. As a
result, the device will be switched to visible for 2 minutes. At that time you can pair
your smartphone to the radio controlled socket.
In order to "search" for radio controlled sockets within reach, push the "+" button
in the app within these 2 minutes. The corresponding radio controlled socket will be
shown in the list. Tap on it and accept the indicated Bluetooth pairing key. After that,
the smartphone is paired with the radio controlled socket automatically.
You have now the possibility to assign a name and a description to clearly identify
the radio controlled socket (e.g., the name "Lamp" and the description "living room").
As a final step, connect the consumer to the radio controlled socket. The consumer
can be switched on and off via the app. Therefore, either tap on the ON/OFF button on
the right in the app or on the symbol (icon) on the left.
With a short or long tap on the middle field with the name and the description, you can
enter the menu "Switching functions" or the menu "Device configuration".
You will find a more detailed description of the app in the operating instruc-
tions of the app which can be accessed in the menu. In order to enter the
menu, either use the menu button of the smart phone or push the menu but-
ton with the 3 superimposed points (depending on the device).
Maintenance and cleaning
The product is maintenance-free. Repair or maintenance work must be carried out
by a specialist.
Before each cleaning, disconnect the radio controlled socket from the power supply.
To do this, pull it out of the wall socket. Disconnect all connected consumers from
radio controlled socket.
You can use a clean, dry, soft cloth for cleaning. Dust can be very easily removed with
a soft, clean brush and a vacuum cleaner.
Do not use aggressive, chemical or scouring cleaning agents, as this may lead to dis-
colouration or changes in the material on the surface.
Declaration of Conformity (DOC)
We, Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare
that this product conforms to the fundamental requirements and the other relevant
regulations of the directive 1999/5/EC.
The Declaration of Conformity for this product is available at www.conrad.com.
Disposal
The product must not be disposed of in the household waste.
Dispose of the product at the end of its serviceable life in accordance with
the current statutory requirements; e.g., return it to any suitable collection
point.
Technical data
Operating voltage............................... 230 V/AC, 50 Hz
Connected load .................................. max. 3680 W/16 A, max. 2070 VA inductive load
Power consumption (typ.)................. approx. 0,2 W (Standby), 0,75 W (max.)
Radio standard Bluetooth ................. V2.1, Class 2
Frequency............................................ 2.4 GHz
Range ................................................... approx. 10 m
Operational temperature range ....... 0 °C to +40 °C
Air humidity ......................................... 15% to 95% relative air humidity, non-condensing
Protection type ................................... IP20
Protection class ................................. I
Child safety device............................. yes
Dimensions (L x W x H) ..................... approx. 116 x 58 x 73 mm
Weight .................................................. approx. 135 g
System requirements for the app .... Android Version 2.3 or higher (compatible with al-
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.
© Copyright 2015 by Conrad Electronic SE.
most all smartphones/tablet-PC's)
V2_1015_01/IB