Ump Settings; Factory Defaults; Web Interface Settings - IMP Pumps NMT 40 Betriebsanleitung

5.6 p

Ump seTTings

5.6.1 f
actOry defaults
Pumps are set to provide 7m of head with proportional pressure regulation. These settings will
provide energy efficiency. If factory settings are not suitable they can be modified over Ethernet
connector and Web interface. Default IP address is 192.168.0.245 and default NetBIOS name
is »nmtpump«.
Pump can be brought to standby or maximum power via digital inputs.
5.6.2 w
eb interface
When the pump is connected to network or another computer, it can be reached by typing its IP
address or NetBIOS name into browser's address line. Default IP address is 192.168.0.245 and
default NetBIOS name is »nmtpump«.
settings
Fig. 4
-23-