Cabletech URZ0194 Bedienungsanleitung Seite 80

Problem
Standby light
not lit
No signal found
No picture or
sound
Scrambled chan-
nel
message
No response to
remote control
The remote
control will not
operate your STB
After moving the
STB to another
room you find you
EN
are no longer able
to receive digital
reception
80
Owner's manual
Possible cause
Mains lead unplugged
Aerial is disconnected
Aerial is damaged/mis-
aligned
Out of digital signal area
Scart/AV is not selected
on your TV
Channel is scrambled
Receiver off
Handset not aimed
correctly
Front panel obstructed
Hand set batteries
exhausted
(1) The batteries in your
remote control need
replacing
(2) There is an ob-
struction blocking the
signal path between
the remote control and
the box
The aerial feed former
new point may come
through a distribution
system which may
reduce the digital signal
now received by the
box.
What to do
Check mains lead
Check aerial lead
Check aerial
Check with dealer
Reduce to another
channel
Select alternative
channel
Plug in and turn on plug
Aim handset at front
panel
Check for obstructions
Replace handset bat-
teries
(1) Replace the bat-
teries
(2) Check that there is
nothing in the way of
the path between the
remote control and the
receiver
Try a direct feed from
the antenna