Initializing A Program To Create A Sound From Scratch - PIONEER DJ TORAIZ AS-1 Bedienungsanleitung

Initializing a program to create a
sound from scratch
When you wish to create a sound from scratch, you can let a simple
basic program consisting of a single oscillator assist you. To perform
this, select a program and initialize it prior to your sound creation.
1 Select a program you wish to initialize.
! Follow steps 3 and 4 in "Choosing and playing a program."
2 Turn off the [SHIFT] button, and press the
[GLOBAL/WRITE] button.
The [GLOBAL SETTING] screen appears in the display and the[GLOBAL/
WRITE] button lights up.
! See step 3 in "Choosing and playing a program" for how to turn on/
off the [SHIFT] button.
3 Turn the [PARAM/CATEGORY] control until the
[Basic Program] screen appears in the display.
When the [Basic Program] is selected, the [LATCH] button flashes.
22. Basic Program
Press Latch to
Load Basic Patch
4 Press the [LATCH] button.
The currently selected program is initialized and the display returns to
the main screen.
! To create a sound, follow steps 2 to 5 in "Editing a program."
For details such as parameter settings, please refer to the Operating
Instructions.
! To cancel initializing, press the [GLOBAL/WRITE] button again
instead of the [LATCH] button. The display returns to the main
screen without initializing the program.
10
En
0