Herunterladen Diese Seite drucken

Glomar MultiSafe DSP HS5 Bedienungsanleitung Seite 13

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

7. Maintenance
7.1 General information
The MultiSafe is absolutely mainteinance-free. Nevertheless, observe the following information in order to
maintain safe operation:
We recommend a solid casing for transportation.
Always keep the voltage tester dry and clean. The housing can be cleaned with a cloth dampened with isopropyl
(alcohol) or soapy water.
7.2 Repeated inspection
According to EN 61243-2 it is recommended to carry out repeated examinations.
It should not exceed the time-limit of 6 years.
Depending on operation conditions and frequency, a previous inspection may be recommendable. The serial
number with the date of manufacturing (WWYYNN=Week Year Number) is imprinted on the backside of the
device. Repeated inspections are offered by the manufacturer and indicated by the inspection plate.
8. Repair
Repair is only allowed by the manufacturer or explicitly authorised repair shops.
In case of damages on the device or failure of the function test according to section 3.2 or for detailed inspec-
tion/calibration, please contact: service@tietzsch.de or send the device and a description of failure back to the
manufacturer (address see page 1).
9. Limited warranty and limitation of liability
By continuous quality checks and production controls, most modern electronics and high quality materials
we guarantee that the tester will be free from defects in material and workmanship for two years.
This warranty does not cover batteries, improper handling, not intended purpose, opening the housing,
improper storage or damages from accidents.
No other warranties such as fitness for a particular purpose will be given.
We are not liable for any indirect, incidental or consequential damages or losses arising from any cause or
theory.
10. Accessories
Art.-no. 84022
Solid box with aluminium frame 60 x 27 x 12 cm
Test electrode
i
G
Y
l
Glomar AG
Seestrasse 11
Art.-no. 89312
Art.-no. 89314
Art.-no. 89316
l
l
CH-9326 Horn
T +41 71 841 70 70
Art.-no. 84333
Bag with shoulder belt 63 x 20/10 cm
i semicircular electrode (standard)
G peaked electrode with M5-thread
Y bifurcated electrode
l
www.glomar.ch
14
13

Werbung

loading