Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Before first use:
Please make sure the earphones are put in properly without using too much force.
Turning the player ON and OFF
3. To turn on the player, simply move the ON/OFF switch to ON. The red LED will start to light up.
4. To turn the player off, simply move the ON/OFF switch to OFF. The red LED will go out.
Setting up your memory card
9. Turn on the player.
10. Please insert a microSD card into the microSD card slot. The card will „click" in..
11. Connect the player with your computer by using a microUSB cable.
12. The player will now appear as USB drive on your computer. Open the newly appeared USB drive.
13. Drag and drop your music into the window of the players USB drive. You don't need to watch out
for any specific folder structure..
14. Make sure to deject your player by performing a right click on the USB drive and selecting deject.
15. You can now disconnect your player from your computer.
16. Please remember that your player will only appear as USB drive if a microSD card is inserted!
Play music
6. Turn on the player and insert your earphones.
7. Wait a couple of seconds for the player to boot up. The red LED will blink if music is being played.
It will be shining permanently if music is paused or not found. If you can't hear any music make
sure to press the PLAY/PAUSE button once.
8. The left and right buttons help you to skip tracks. If you hold them, you can fast forward or
rewind a specific track.
9. The Plus and Minus buttons will help you to increase and decrease the volume.
10. The PLAY/PAUSE button is used to pause a track and continue with it by pressing the button
again.
®
www.bertronic.de
www.ber-mond.de
Page 6
Werbung
