Electrical Connection; Power Connection; Connecting To A Tv Device; Connecting To A Computer Network - Hama 00054810 Bedienungsanleitung

Setting up and connection

Electrical connection

For safe and trouble-free operation of the appliance, the following instructions on the elec-
trical connection must be be observed:
The device is supplied with 12 VAC voltage via the mains adapter supplied . Only use
■
the AC adapter provided for connecting to the mains supply .
Before connecting the device, compare the connection data (voltage and frequency)
■
on the rating plate with those of your mains power supply . This data must correspond
in order to avoid damage to the device .
Make sure that the adapter cable does not come in contact with hot surfaces or sharp
■
edges .
Make sure that the power cable is not stretched tightly or twisted .
■
Do not allow the adapter cable to hang over edges (danger of tripping) .
■
If the device is not to be used for a longer period of time, disconnect power supply from
■
the mains supply .

Power connection

Plug the power supply into the DC IN (9) socket on the back of the device .
‹
Plug the power supply into a mains socket .
‹
NOTE
After connecting, the power indicator lights up .
►

Connecting to a TV device

The device is equipped with a high-definition multimedia interface (HDMI). HDMI is a
high-speed digital interface, which transmits both non-compressed and high-definition
video signals . Sound, even in multi-channel mode, is also transmitted via the HDMI output
together with the video signals
Insert the plug of the HDMI cable into the HDMI socket (3) on the device .
‹
Connect the free end of the HDMI cable to the HDMI socket of the HD TV device .
‹
For playback, switch the HD TV device to the correct HDMI input .
‹

Connecting to a computer network

LAN connection: local network

Connecting to a LAN computer network (Local Area Network) requires a network cable
(Ethernet cable/twisted-pair cable) Cat5, Cat5e or Cat6 .
NOTE
The network cable is not supplied as standard .
►
Connect the RJ45 plug of the network cable to the LAN interface (5) of the device .
‹
Connect the other end of the network cable to the LAN interface of your router,
‹
network hub or switch .
Internet TV Box
g
43