Default Setting; General Setting - Kruger&Matz KM2003 Bedienungsanleitung

Owner's manual

9.3 Default Setting

Touch [DEFAULT] icon of Setting menu, the password menu popup and the password is: 888 888,
then to go to the [Default Setting] menu and you can find the following settings.
[RADIO AREA] Radio Area Setting
Touch the [RADIOAREA] option, then go to the submenu of Radio Area. You can touch the
[Up/Down] icon to select: Europe -> USA1 (North America) -> USA2 (South America) -> Japan ->
Russia.
[DEFAULTSET] Default Setting
Touch [DEFAULT SET] option, prompt box (reminding you whether restore default Settings menu
or not) will popup , if needed to restore default setting, choose the [Yes] , otherwise choose [No] .
[Touch Calibrate] Touch Calibrate
Touch [Touch Calibrate] icon , prompt box (reminding you whether enter touch calibrate procedure
or not) will popup, if needed to touch calibrate, choose the [Yes] ,otherwise choose [No].

9.4 General Setting

Touch [GENERAL] icon of Setting menu to go to the [General Setting] menu and you can find the
following settings.
[BEEP] Beep Tones
Touch the [BEEP] option to select {Disable/Enable] state for Beep.
[DISABLE_VIDEO] Disable Video
Touch the [DlSABLE_VIDEO] option to select [Disable / Enable} state for Disable Video.
[CAMERA] Settings for Rear CCD Camera
Touch the [CAMERA] option,then select [Normal/Mirror] of camera image.
[PlC_SET] Display Adjuslment
Touch the [PIC_SET] option into display adjust menu, touch [up/down] icon to choose the bright-
ness, contrast, and hue that needed to set, after finishing setting , touch [return] to confirm and
exit settings.
36