Replacing The Battery [Dc Type]; Care And Cleaning - Toto DSE101EEB Bedienungsanleitung

REPLACING THE BATTERY [DC Type]

1.Remove cover of battery case.
2.Install four (4) D size alkaline batteries.
NOTE: Make sure the batteries are
installed in correct orientation
(polarity).
3.Replace battery case cover.
4.Tighten screws.
● The standard life cycle time is 2 years,
based on average use 2000 times/month.
● For Light Cleaning
Wipe away any debris adhering to the
spout or sensor.
● For Heavy-Duty Cleaning
Wipe away debris with a damp cloth
containing a suitable amount of a neutral,
dishwashing detergent.
Then wipe clean with a damp cloth.
● When cleaning around the sensor,
please be careful not to scratch
the surface of the sensor window.
● Do not use detergent that might
damage the surface of spout.
These include:
● Detergents containing acid, chlorine
bleach or alkali.
● Detergents that are coarse granules in
nature, such as polishing powder.
● Solvents such as paint thinner or benzene.
● Abrasive aids such as nylon scrubbers/brushes,
steel wool, etc.
Battery
case cover
Screws

CARE AND CLEANING

12
Battery
case
－
＋
＋
－
Batteries
Sensor window