Maintenance And Cleaning; Disposal - Renkforce ZD1406 Bedienungsanleitung

- The remaining time will be shown on the display.
- The symbol indicates that the fryer is heating up.

12. Maintenance and cleaning

Do not use rough, abrasive or metal cleaning implements as these may damage the non-stick
coating on the frying basket and frying pan.
Liquids must not enter the interior of the device. Do not immerse the fryer or the mains cable in
water.
1. Turn off the fryer and disconnect the mains plug from the power socket before cleaning.
2. Let the fryer cool down to room temperature.
3. Cleaning the fryer:
3.1. Place the frying pan and frying basket in warm water with a small amount of washing-up liquid
and clean them with a sponge.
3.2. Remove splash marks on the device interior using a damp cloth and a small amount of washing-up
liquid.
- Do not place any parts in the dishwasher.
- Do not use washing-up liquid to clean the exterior of the fryer.
- Do not use any abrasive cleaning materials or implements. These may damage the fryer.
4. Let all parts dry out completely before using the fryer again.
5. Store the fryer in a cool, dry place free from moisture and keep it out of the reach of children.

13. Disposal

Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
30