Product Description; First Steps - testo 606-2 Bedienungsanleitung

Product description

14
Product description
At a glance

First steps

Inserting b b atteries:
1 To open the battery compartment, push the battery cover
down.
2 Insert batteries (2x 1.5 V type AAA). Observe the polarity!
3 To close the battery compartment, push the battery cover
back on.
Basic s s ettings ( ( configuration m m ode):
Adjustable functions
· Unit of temperature: °C, °F
· Unit of humidity: %, td (dew point), WB (wet bulb)
· Auto off function: OFF, ON (instrument switches off automatically if no key is
pressed for 10 minutes)
1 When switching the instrument on, press and hold
and
- The adjustable function is displayed. The current setting
flashes.
2 Press
appear on the display (configuration mode).
( ) several times until the desired setting flashes.
Protection cap: Park position
Sensing electrodes
Caution! Risk of injury
from sensing electrodes!
Attach protection cap
when not in use.
Humidity/temperature sensor
Display
Control keys
Battery compartment (on rear)
Test resistance contact
until