Troubleshooting - Renkforce TP-1000 Bedienungsanleitung

13. Troubleshooting

By purchasing this device, you have acquired a product designed to the state of the art and operationally
reliable. Nevertheless, problems or errors may occur.
Therefore, we would like to describe how to eliminate possible errors here:
Always observe the safety information.
No sound is audible:
• A device in the playback chain is not turned on.
• The wrong input was selected on the amplifier.
• The volume controller at the amplifier is set to minimum.
• The inserted cassette is not recorded.
One channel does not work:
• A cinch cable has come loose from the cassette deck or the amplifier input.
• When recording, a cinch cable has come loose from the cinch input of the cassette deck or the amplifier
output.
• A speaker cable has come loose at the amplifier.
A drone is audible:
• The cinch cable is defective.
Playback is dull and subject to noise:
• The tape head is contaminated.
• The cassette used is old or deteriorated.
Repairs other than those described above must only be carried out by an authorised specialist.
34