Operation - Renkforce TP-1000 Bedienungsanleitung

9. Operation

Only take the device into operation after familiarising yourself with its functions and these
operating instructions.
Check all the connections again.
1) POWER button
This button switches the cassette deck on and off.
Position ON > Device is on or in standby mode (if it is switched off via the system remote control of the
amplifier A-1000)
Position OFF > device is switched off.
(2) Cassette drives
The cassette is inserted here.
The device has two drives:
Deck A is used for playback only
Deck B can play back record.
(3) Switch NOISE REDUCTION
Push this switch (put it in position ON), to activate the dynamic drone suppression system.
(4) Display
Here, the signal levels at recording or playback mode and the operating conditions are displayed.
27