Control Elements And Connections; Front Panel Controls; Connections On The Rear Panel - Inverto IDL-7000PVR Kurzanleitung

Control elements and connections

View of the front panel
4 9 8 6 5 7 12

Front panel controls

1. VFD-Display (10 digits, 7x5 segment display)
Indicates programme selected, time, etc...
Examples of possible displays:
-12:00 current time
-MENU the on-screen menu is active
2. Multimedia card reader
3.
Infra-red sensor (Remote Control)
Receives signals from the remote
control unit
4. Standby key
On/Off switch
5.
Programme up
Key to enable fast zapping of programmes in
ascending order
6.
Programme down
Key to enable fast zapping of programmes in
descending order
7. Programme right
Key to enable navigation in the graphical unit interface
8.
Programme left
Key to enable navigation in the graphical unit interface
9. OK
Confirming a selection
10.
Common Interface*
Two slots for expansion modules (e.g. for
reception of Pay-TV)
11. Stop
12.
Rewind
13.
Forward
14. Play / Pause
15. Record
16.
USB-B
17.
USB-A
18. CA Interface x 2
(conditional access)
*optional only for certain receiver models
View of the rear panel
12 4 11
14 11 13 15 2 16 17
5 2 13 10 6 3
10 3

Connections on the rear panel

Mains Power Connection
1.
For connecting to domestic power supply
cable supplied) 90-260 V AC, 50-60 Hz
Optical Digital Audio Output
2.
S-VHS
3.
4. RF Modulator Out
5. RS-232 Data Interface
Serial interface for updates, etc.
Audio Outputs (L/R)
6.
Cinch analogue connections for connecting to
a Hi-Fi/Audio system
Power Switch (On/Off)
7.
TV Scart
8.
For connection to TV set
9. VCR Scart
Facility for connecting a video recorder
Video Output (CVBS, composite, FBAS)
10.
Facility for connecting an additional video
recorder or TV set
11. RF In
Input for a terrestrial antenna signal(*)
12. RF Loop Through
13. Electrical Digital Audio Output
8 9
18 1
1 7