Other Options; System Setting - Inverto IDL2000 S Bedienungsanleitung

6. Other Options

This menu consists of 5 sub-menus as shown below.

• System Setting

• Parental Lock
• Time Adjust
• Time Reservation
• Factory Default
6.1 System Setting
The System Setting menu allows you to set the system according
to your preferences.
1. OSD Language : select the desired language that will appear
in all menues.
2. Audio Language: Select the default audio language under
the condition that this language is supported by the
broadcaster.
3. LNB power: If your Inverto IDL2000S is connected to the
LNB, select YES. If your Inverto IDL2000S is connected to
another receiver through Antenna Loop Through connection,
you should check which receiver is connected directly to the
LNB. In case the second receiver is directly connected to
the LNB, then select OFF.
4. Video output: If your SCART supports RGB control, select
RGB, Otherwire select CVBS.
5. Display Info Bar: You can adjust the displaying time interval
of the info bar from 2 sec to 12 sec. Default value is 6 sec.
6. Start On Channel: If you press the OK key, the channel list
will be displayed. You can select one channel from the list.
The selected channel starts once you turn on Inverto
IDL2000S.
7. UHF Standard: Select UHF type.
8. UHF Channel: Select your desired UHF channel for satellite
mode.
Note: In countries where UHF is not used, options in List 6 and
7 will be deleted.
14