Channel Search - Fixed - Inverto IDL2000 S Bedienungsanleitung

10. Re-Sync : When all the locations of searched satellites are
shifted for any reason, you can realign them once you
adjusted one satellite location.
11. Go to 0" for DiSEqC 1.2 : When you install the motor of
DiSEqC 1.2 antenna, you can select this function to move
the center of the antenna to 0°∆.
12. Search Option : Inverto IDL2000S allows you to search
channels with convenient options as shown below.
• FTA Only
• Not searched TP only
• Sort by Scramble
If you select Sort by Scramble, Inverto IDL2000S sorts the scrambled channels automatically.
If you select not searched TP only, Inverto IDL2000S searches for channels in the TP, which were not
being searched.
5.2 Channel Search – Fixed
1. Antenna : Select antenna
2. Satellite : Select desired satellite using arrows keys. Pressing
the OK key will also display a list of satellites.
You can view the information of the selected satellite on the
right side.
Edit Mode: If you wish to edit preprogrammed data such as
Transponder, Frequency, Symbol Rate, Polarization and 22
KHz, please press the EDIT mode key (Red color key) on the
RCU to display the command box. You can then move into
those columns to change the value.
13