Restoring Default Settings; Wireless Flash Settings - Olympus FL-600R Bedienungsanleitung

Restoring Default Settings

Restoring Default Settings
1
Keeping the OK button pressed, press the BACK LIGHT button for 2 s.
The control panel will blink once when settings are reset.

Wireless Flash Settings

Wireless Flash Settings
Wireless control is available with Olympus digital cameras that support RC mode. The unit is
controlled by means of a fl ash mounted on the camera. It can also be mounted on a camera
for wireless control of multiple remote fl ash units. For information on cameras that support
this system, see the camera manual.
1
Set the camera and fl ash to RC mode.
Press MODE ( F ) and rotate the dial to select a fl ash control mode.
2
Use the fl ash to select the channel and group.
Press MODE ( F ) and use FGHI to highlight items and rotate
the dial to change.
Set the camera and fl ash to the same channel.
Channel
The camera can adjust fl ash settings
to which the fl ash belongs.
Group
* Including fl ash control mode, fl ash level, and fl ash compensation.
14
EN
separately for up to 3 groups; choose the group
*