Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Funktion
Type 165
The technical data are not binding. They are not warranted characteristics and are
subject to change. Please consult our General Conditions of Supply.
Installation
Can be installed in any position. Installation with magnet system upright
is recommended. Note direction of flow.
Stickon sleeves: use special Tangit adhesive.
Fusion joint: PVDF
Nuts: Screw on evenly on both sides only by hand. Contamination in the
piping (seal material, swarfs, etc.) must be removed.
The valve body should not be stressed when installed.
The manual actuator is locked in place by pressing down and turning
to the right (clockwise direction). The valve body can be fastened on the
bottom.
Function A
normally closed (NC)
Werbung
